Dashlights and charging issues

[powerline84]

I think we have your harnesses pretty well tested out. The board is the likely culprit at this point. We will do some jumper techniques tomorrow if you have time.

Yeah brother I'll be out there in the garage adjusting crossgate shift linkage in the morning.

[powerline84]

A few years back I had several lights out and gauge issues when I first powered things up from a 5 month winter nap. I ended up removing every bulb and socket along with instrument contact nuts and cleaned everything with tarn-x. Every exposed copper trace contact was cleaned. I reassembled all of it and everything worked perfectly after that.

That being said, now that Delorean Europe has New remanufactured PCB's
I will be replacing the old one since there are connector tabs popped loose.


Sent from my iPhone using Tapatalk

I have one on the way

[DMC5180]

Definitely worth replacing.


Sent from my iPhone using Tapatalk

[Ryan King]

Those NOS and original boards have not held up and are utter shit.

Get a new one from Ed. I did so with no regrets. I also advise updating the nuts from the original ones to brass ones for a better connection. I have enclosed those photos for you as all with the correct sizing. Good luck

Photos of my experience -

Old Crappy Board
14102041_10157429539185268_729678693_n.jpg14114066_10157429539055268_29756874_o.jpg14114105_10157429539005268_1071763025_o.jpg14123586_10157429538910268_1677864847_o.jpgIMG_7768.jpgIMG_7769.jpgIMG_7770.jpg

New Uding Board
14138506_10157429539355268_1636864587_n.jpg14169632_10157430727215268_590348911_n.jpgIMG_5041.JPGIMG_7511.jpgIMG_7533.jpgIMG_7534.jpgIMG_7738.jpg

Finished Product. I feel like the cluster worked even better then before. More responsive gauges and brighter light function.
14203000_10157469640410268_1876294919_o.jpg

[powerline84]

Awesome man thanks !

[AugustneverEnds]

I forgot to add that replacing the steel washers and nuts with brass helps conductivity and Home Depot has what you need, good point Ryan King.

Where in NY are you by the way? I'm around Syracuse

[powerline84]

North of watertown

[Rich_NYS]

I forgot to add that replacing the steel washers and nuts with brass helps conductivity and Home Depot has what you need, good point Ryan King.

Where in NY are you by the way? I'm around Syracuse

North of watertown

Jimmy,

Nick is one of the guys I mentioned to you [near Syracuse] I planned to invite.


Nick,

You're invited to meet at Jimmy's, we're getting together near the end of June.


-Rich

[powerline84]

Bad ass . Look forward to meeting you guys .

[AugustneverEnds]

Jimmy,

Nick is one of the guys I mentioned to you [near Syracuse] I planned to invite.


Nick,

You're invited to meet at Jimmy's, we're getting together near the end of June.


-Rich

I just saw this. I will definitely plan on being there. Just got 10287 back with new tires and some exhaust work done so should be ready to travel.