Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23

Thread: Bosch EV12 injectors?

  1. #1
    '82 T3 Turbo FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    540

    My VIN:    10270

    Bosch EV12 injectors?

    Seem like a good candidate for Kjet heads. Anyone ever try?

    I picked up a p/n 280157012 just to eyeball it. They're a fairly easy to find VW/Audi part. 4 hole injector, end cap looks to be the cone-type (not the two spray version) but I haven't ran any fluid through it to double check yet. 26.9lb/hr equivalent - plenty of overhead for power without being expensive.

    Tip is just about at the opening to the intake port, not quite as long as a kjet injector but way closer to the intake path than most others.

    IMAG2539.jpg
    Luke S :: 10270 :: 1982 Grey 5-Speed :: Single T3 .60/.48 Watercooled :: Borla Exhaust :: MSD Ignition :: MS3X EFI :: DevilsOwn Methanol Injection

    Console5.com - Game console parts, kits, games and more. [shop] [wiki] [RSS] [f] [t]

  2. #2
    Senior Member Josh's Avatar
    Join Date:  Mar 2013

    Location:  SK, Canada

    Posts:    1,648

    My VIN:    11408

    Club(s):   (TXDMC)

    They look very similar to EV1/EV6 injectors I have used in the past, with the exception of the actual injection point on the bottom. the ev12s stick out very far.
    If you are after a compact injector (height) I would suggest the 99+ Gm truck injectors. They are basically a stubby EV6

  3. #3
    '82 T3 Turbo FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    540

    My VIN:    10270

    They do seem like they will fit. I will probably have to swap one of the compressor bracket bolts for either a smaller head or an allen head. Or just remove it entirely since there are 3 other bolts and a belt to hold it in place Could install injector extension caps too but they're probably not needed.

    I'mma gonna use 'em, we'll see how it goes!
    Luke S :: 10270 :: 1982 Grey 5-Speed :: Single T3 .60/.48 Watercooled :: Borla Exhaust :: MSD Ignition :: MS3X EFI :: DevilsOwn Methanol Injection

    Console5.com - Game console parts, kits, games and more. [shop] [wiki] [RSS] [f] [t]

  4. #4
    President, DeLorean Industries
    Join Date:  May 2011

    Location:  CLE/PHX

    Posts:    2,270

    My VIN:    5646,5080, 5880, 10234, 3639, 2518, 10586, 1538

    We use that body style on our builds.

  5. #5
    '82 T3 Turbo FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    540

    My VIN:    10270

    I appreciate that you are willing to share that 😊
    Luke S :: 10270 :: 1982 Grey 5-Speed :: Single T3 .60/.48 Watercooled :: Borla Exhaust :: MSD Ignition :: MS3X EFI :: DevilsOwn Methanol Injection

    Console5.com - Game console parts, kits, games and more. [shop] [wiki] [RSS] [f] [t]

  6. #6
    Matt Drive Stainless's Avatar
    Join Date:  Mar 2016

    Location:  Washington D.C.

    Posts:    431

    It really helps to keep the intake valves cleaner if the injectors spray onto them instead of the conventional Kjet design. Like night and day difference.
    New & Improved V3 S/S Alternator Tensioning Bracket - $39.99
    New & Used DeLorean Parts on eBay HERE.
    S/S Upper Alternator Bracket for Saturn/Autozone Alternator - $39.99
    QA1 Coil-Over Suspension Kit - Complete Kit - $1,149.99 w/ FREE SHIPPING
    QA1 "DIY" Coil-Over Suspension Kit - $99.99
    Mirror switch rebuilding service w/ new springs & ball bearings - $49.50
    HEI Performance Ignition Module (Exchange) - $149.99
    Welding services also (all metals)!
    http://www.drivestainless.com

  7. #7
    '82 T3 Turbo FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    540

    My VIN:    10270

    So does meth injection!
    Luke S :: 10270 :: 1982 Grey 5-Speed :: Single T3 .60/.48 Watercooled :: Borla Exhaust :: MSD Ignition :: MS3X EFI :: DevilsOwn Methanol Injection

    Console5.com - Game console parts, kits, games and more. [shop] [wiki] [RSS] [f] [t]

  8. #8
    President, DeLorean Industries
    Join Date:  May 2011

    Location:  CLE/PHX

    Posts:    2,270

    My VIN:    5646,5080, 5880, 10234, 3639, 2518, 10586, 1538

    We use a much higher lb rating though.

  9. #9
    Not a DeLorean Guru
    Join Date:  May 2011

    Location:  Rochester, NY

    Posts:    1,961

    My VIN:    01049

    Quote Originally Posted by FABombjoy View Post
    So does meth injection!
    walter white.jpg
    -Mike
    1981 DeLorean, heads/cams/exhaust, EFI
    1999 Corvette, heads/cam/exhaust, 440 BHP
    2005 Elise, stock
    2016 Chevy Cruze

  10. #10
    '82 T3 Turbo FABombjoy's Avatar
    Join Date:  May 2011

    Location:  Lansing, MI

    Posts:    540

    My VIN:    10270

    Quote Originally Posted by Delorean Industries View Post
    We use a much higher lb rating though.
    It's not the size of the injector, it's how you use it

    Quote Originally Posted by opethmike View Post
    "I love meth. Methy meth meth. Here it goes down, down into my motor." -Walter Burgundy
    Luke S :: 10270 :: 1982 Grey 5-Speed :: Single T3 .60/.48 Watercooled :: Borla Exhaust :: MSD Ignition :: MS3X EFI :: DevilsOwn Methanol Injection

    Console5.com - Game console parts, kits, games and more. [shop] [wiki] [RSS] [f] [t]

Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •