FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
Rowan contactor prop
Well I decided to try and make my first attempt at building a bttf time machine prop for fun. I have discovered most people who do this are unwilling to share or help. I am the opposite. So here is what I did. Please spare me the movie accuracy comments :-). Hopefully this helps someone or atleast here is what I did.
2 Rowan contactors off eBay
2 bottles of testors flat cherry for bottom half of contactor 1197
2 bottles of flat red for uppers 1150
1 bag of 10 flat Philips with nuts #8-32x3/4 in (6 each neaded)
2 packs of testors brushes
1 bottle of thinner 1148
1 piece of 1/8 aluminum 4x10
1 pack of countersink drill bits (1/4 followed by just a hint of 3/8s lol)
First I disassembled contactors and painted them . Allow 72 hours before reassembly. Then reassembled and removed 4th blades. Marked and drilled plate based of references of movie car , just tried to eyeball. Mounted contactors then used random wire and connectors I had laying around again based of pics I could find. Then did a final top coat while mounted....and walla done. Cost me 90 bucks total in supplies to build vs almost 300 for some replicas I have seen out there and I felt like a kid building car models again.
20170704_171131.jpg20170708_125528.jpg20170708_125518.jpg20170708_115735.jpg20170708_114936.jpg20170708_114922.jpg20170708_114333.jpg20170705_200212.jpg20170704_112657.jpg20170708_125532.jpg
Last edited by powerline84; 07-08-2017 at 01:27 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules