FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 6 of 6

Thread: Manual Gearbox Linkage - missing part

  1. #1
    Member madstudios's Avatar
    Join Date:  Oct 2016

    Posts:    77

    Manual Gearbox Linkage - missing part

    Hi Everyone!
    I was looking into my gearchange assembly, and I noticed that there is a missing part, but I don't know the name and couldn't find in dmc site.
    Someone know where I can find it?

    This is the actual picture of my gearchange assembly


    And this the picture I found of another car, with the part I need:


    Thanks!


    Fernando Silotto. Sao Paulo - Brazil
    Delorean Vin 3772

  2. #2
    Senior Member Rich's Avatar
    Join Date:  May 2011

    Location:  San Francisco Bay Area, Calif.

    Posts:    2,083

    My VIN:    0934

    Club(s):   (NCDMC) (DCUK)

    The missing piece is the reverse lockout bracket. At least that's what I would call it.

    You're right - I don't see it listed separately in the parts diagram.

    If you want one (plus the two bolts for it) then get in touch with a D parts vendor or post up on Want to Buy / Parts here. The description is probably the toughest piece of this puzzle.
    March '81, 5-speed, black interior

  3. #3
    Member madstudios's Avatar
    Join Date:  Oct 2016

    Posts:    77

    Quote Originally Posted by Rich View Post
    The missing piece is the reverse lockout bracket. At least that's what I would call it.

    You're right - I don't see it listed separately in the parts diagram.

    If you want one (plus the two bolts for it) then get in touch with a D parts vendor or post up on Want to Buy / Parts here. The description is probably the toughest piece of this puzzle.
    Thanks Rich!
    Until I don't find the original one, and it was pretty simple to make, I decided to fabricate my own. Already installed and tested.


    Fernando Silotto. Sao Paulo - Brazil
    Delorean Vin 3772

  4. #4
    Member
    Join Date:  Feb 2017

    Posts:    33

    Awesome!
    --
    Mike

  5. #5
    Senior Member
    Join Date:  May 2011

    Location:  Northern NJ

    Posts:    8,581

    My VIN:    10757 1st place Concourse 1998

    I bet, if you look around deep inside, you will find it laying inside. You may have to remove the gearshift to see.
    David Teitelbaum

  6. #6
    Not a DeLorean Guru
    Join Date:  May 2011

    Location:  Rochester, NY

    Posts:    2,405

    My VIN:    01049

    Quote Originally Posted by madstudios View Post
    Thanks Rich!
    Until I don't find the original one, and it was pretty simple to make, I decided to fabricate my own. Already installed and tested.


    Fernando Silotto. Sao Paulo - Brazil
    Delorean Vin 3772
    Nice looking piece!
    -Mike

    My engine twists my frame.

    1981 DeLorean, Carb LS4 swap completed
    1999 Corvette, cam/headers/intake manifold, 400 rwhp
    2005 Elise, stock
    2016 Chevy Cruze

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •