I think the Summit number is 2471S for the Thermocap.
FWIW, any cap that crosses over from an AC brand #RC-15 will work.
Not sure of what you are after, but if its not the aesthetics/novelty, you might want buy a laser temperature gun (which costs less than many of the caps mentioned). Then you can confirm your gauge and use it for a lot of other things.
+1 Luke & Robert...The gauge should show temperature for the head, not the radiator or coolant tank.
I was also going to get the gauge cap but solely because I thought the OE cap looked rubbish. If it's totally asthetics you are after, I grained my cap and painted the recesses. I suppose you could polish it on a buffer for even more flash.
Here is the only good pic I have of it when I was doing my valve clearance adjustment.
20200311_175546.jpg
Posts: 448
A gauge coolant cap would be cool Does someone have a link to a 14, 15, or 16 PSI cap that fits?
Ron
Last edited by DMC-Ron; 03-14-2021 at 06:09 AM.
Location: Austin MN
Posts: 586
My VIN: 03500
Posts: 448
Dave,
Good point. The temperature would reflect the air temperature in the reservoir tank, not the coolant. It would be a lower temperature than the coolant because of the skin loss thru the tank wall. Still, it might be only a few degrees off considering the surface area of the coolant. But your comment made me wonder if the temperature of the coolant liquid in the reservoir really reflects the coolant system temperature. Is there a continual flow thru the reservoir such that it's temperature represents the actual system coolant temperature?
Ron
Location: Austin MN
Posts: 586
My VIN: 03500
I was also thinking about the thermal dynamics of what's in the overflow tank like steam it could read higher. That's why I think if you want a second gauge a inline would be better. There supposed to be designed for racing purposes. For what benefit it has I don't know maybe just to make money. 🙄
In any case if you use a gauge on a cap when working on the engine or trouble shooting it still won't give fast enough readings to tell if you might be trouble.
Dave B.
Last edited by WHO1DMC; 03-15-2021 at 05:12 AM.