K-jet take-offs remaining from my EFI conversion. Everything worked as of January of this year. Most of this is 50% of DMCH price or lower. A few unavailable items here too!
IMAG2784.jpg
Wide open throttle switch & securing plate: $30
Idle switch: $35
"BUTTERFLY ASSY TO LOWER HOUSING GASKET" - windowweld urethane filled to prevent tearing/leaking. The filler could use trimming (cuts easily with a utility knife) but it's mostly invisible when installed: $30
Fuel distributor plate, counterbalance, backfire bumper, other doodads and bearings (see other photo for bag 'o stuff): $30
Delay valve: $20
IMAG2786.jpg
Cold-start valve / injector: $80
Set of 6 fuel injectors w/ seals & clips: $50
Idle motor brackets: $30
Diagnostic bracket & plug (flywheel pickup wire is cut): $10
Thermal vacuum switch: $30
Thermo-time switch: $80
Lambda coolant resistor / thermistor: $20
Vacuum advance unit: $50
Ignition ballast resistor: $10
Vacuum solenoid: $25
Bag of fuel metering bits - see previous photo for description
Not shown, I can easily get pics if interested:
Idle speed computer: $50
Vapor canister bracket: $20
BAE turbo intake adapters. Clearanced to fit together better and modified for improved PCV and water injection fittings: $200
I ship worldwide, please let me know where and how fast you want it. International first class usually starts at $12 for lighter things.
If you want to make an offer, just make an offer, please no "whats your best price" PMs
