I got a problem
all the flashers works fine around the car but the right flasher doenst flash in the cluster ?? already changed the bulbs
i ve got no lamda light in the cluster too..
need some help.
Posts: 7
I got a problem
all the flashers works fine around the car but the right flasher doenst flash in the cluster ?? already changed the bulbs
i ve got no lamda light in the cluster too..
need some help.
Most likely the flex circuit board in the binnacle is the cause for bad connection.
Dave M vin 03572
http://dm-eng.weebly.com/
Location: Middleburg Heights, OH
Posts: 1,939
"replaced the bulbs" Which bulbs, the dash bulbs?
If the dash bulbs are intact, replace the printed circuit board. $32 at DMCH:
http://store.delorean.com/p-7080-printed-circuit.aspx
Those things are easy to break a connection on and ridiculous to repair, replacement makes the most sense.
Otherwise, bulb replacement in dash and you'll be set. If you're not sure, swap with a known good bulb in the dash (other blinker? Headlights? High beams? Etc.) and re-check.
Location: Middleburg Heights, OH
Posts: 1,939
Incandescent bulbs blow out far more frequently in blinking locations than steady locations from what I remember. Something about number of times turned on/off rather than hours run. LED's are immune and dim instead.
As a "while you're in there", LED's can be considered. Not the battery light yet -- that one is entirely possible to do but requires careful balancing of two separate circuits and I have not been able to field test yet. No promises.