Location: Middleburg Heights, OH
Posts: 1,939
Last edited by Shep; 10-26-2017 at 09:19 PM.
OK guys -
I ended up finding some tips and taking them to a local shop to get welded on. You can tell from the photos how I had one tip that was damaged, thus the need for replacement. I ended up purchasing 2.5" inlet to 3" outlet slant cut rolled edge 304 stainless steel exhaust tips that were 6.5" long. Though they don't say DMC on them, I think they turned out quite well. What do you think?
delorean 6.28 034.jpgIMG_1345.jpgIMG_1452.jpgIMG_1451.jpgIMG_1450.jpg
You can't buy happiness, but you can buy a DeLorean and that's sort of the same thing....
Location: Northern NJ
Posts: 8,576
My VIN: 10757 1st place Concourse 1998
The new ones look great but I still say the original, bent one could have been straightened out by someone who knows what he is doing.
David Teitelbaum
Dana
1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
1985 Chevrolet Corvette, Z51, 4+3 manual
2006 Dodge Magnum R/T (D/D)
2010 Camaro SS (Transformers Edition)