FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 3 of 3

Thread: Delorean thermostat housing

  1. #1
    EFI Squirted DARCOM's Avatar
    Join Date:  May 2011

    Location:  San Antonio TX

    Posts:    98

    My VIN:    2942

    Delorean thermostat housing

    Does any one know if there is different thermostat housing that will fit the Delorean. I need one that does not point to the ac compressor, but more toward the back driver side of the car. Thanks

  2. #2
    Senior Member Rich's Avatar
    Join Date:  May 2011

    Location:  San Francisco Bay Area, Calif.

    Posts:    2,070

    My VIN:    0934

    Club(s):   (NCDMC) (DCUK)

    Don't know of one that does exactly that.

    Would one that at least points upward over the A/C compressor help? Looks like this fits an '81 B28F engine like ours. No guarantee, tho.
    http://www.partstrain.com/ShopByDepa...sing/VOLVO/265
    March '81, 5-speed, black interior

  3. #3
    EFI Squirted DARCOM's Avatar
    Join Date:  May 2011

    Location:  San Antonio TX

    Posts:    98

    My VIN:    2942

    Thanks. I'm putting trottlebodys on the towers of the intake manifold. Even though the stock one will still work for what i'm doing the clearance will very tight. I was hoping someone here would have maybe tried a different kind of housing that worked. The bolt spacing from where i measured is 82 mm at the center of each bolt hole. If i cant find one i will make a spacer and move the angle but still on the look out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •