Does any one know if there is different thermostat housing that will fit the Delorean. I need one that does not point to the ac compressor, but more toward the back driver side of the car. Thanks
Does any one know if there is different thermostat housing that will fit the Delorean. I need one that does not point to the ac compressor, but more toward the back driver side of the car. Thanks
Location: San Francisco Bay Area, Calif.
Posts: 2,082
My VIN: 0934
Club(s): (NCDMC) (DCUK)
Don't know of one that does exactly that.
Would one that at least points upward over the A/C compressor help? Looks like this fits an '81 B28F engine like ours. No guarantee, tho.
http://www.partstrain.com/ShopByDepa...sing/VOLVO/265
March '81, 5-speed, black interior
Thanks. I'm putting trottlebodys on the towers of the intake manifold. Even though the stock one will still work for what i'm doing the clearance will very tight. I was hoping someone here would have maybe tried a different kind of housing that worked. The bolt spacing from where i measured is 82 mm at the center of each bolt hole. If i cant find one i will make a spacer and move the angle but still on the look out.