Results 1 to 3 of 3

Thread: Stay, front fender 108692... lower point attaches WITH spoiler or independent of it?

  1. #1
    Senior Member Jonathan's Avatar
    Join Date:  Jun 2011

    Location:  Canada

    Posts:    4,185

    My VIN:    3937

    Stay, front fender 108692... lower point attaches WITH spoiler or independent of it?

    Getting things back together after having removed my front fascia and trying to do it right.

    There is one of these on each side: http://store.delorean.com/p-9392-stay-frt-fender.aspx

    The lower end of this brace connects to the bottom edge of the quarter panel. My question is whether it also attaches together with the far corner of the spoiler?

    What makes me wonder is this screw on the front fascia page: http://store.delorean.com/p-9711-sems-screw-m5.aspx

    There is no separate hole in the lower edge of the quarter panel for these two things to screw into independently and so figured they must be one and the same. Correct?

    I have found a number of fasteners either missing on my front end or stripped out and am trying to figure out the puzzle of it all and get it back the way it was intended. Thanks.

  2. #2
    Senior Member DMC-81's Avatar
    Join Date:  Apr 2014

    Location:  Florida

    Posts:    1,608

    My VIN:    <2000

    Club(s):   (DCF)

    Quote Originally Posted by Jonathan View Post
    Getting things back together after having removed my front fascia and trying to do it right.

    There is one of these on each side: http://store.delorean.com/p-9392-stay-frt-fender.aspx

    The lower end of this brace connects to the bottom edge of the quarter panel. My question is whether it also attaches together with the far corner of the spoiler?

    What makes me wonder is this screw on the front fascia page: http://store.delorean.com/p-9711-sems-screw-m5.aspx

    There is no separate hole in the lower edge of the quarter panel for these two things to screw into independently and so figured they must be one and the same. Correct?

    I have found a number of fasteners either missing on my front end or stripped out and am trying to figure out the puzzle of it all and get it back the way it was intended. Thanks.

    Hi Jonathan,

    You are correct. Here's a picture of mine if it helps any...

    image.jpg
    Dana

    1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
    Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
    2006 Dodge Magnum R/T (D/D)
    2010 Camaro SS (Transformers Edition)

  3. #3
    Senior Member Jonathan's Avatar
    Join Date:  Jun 2011

    Location:  Canada

    Posts:    4,185

    My VIN:    3937

    Quote Originally Posted by DMC-81 View Post
    Hi Jonathan,

    You are correct. Here's a picture of mine if it helps any...

    image.jpg
    Yes, it certainly does help! Thanks a lot, Dana!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •