Results 1 to 4 of 4

Thread: Just curious

  1. #1
    Member
    Join Date:  Jun 2011

    Posts:    44

    Just curious

    Doing some routine maintenance on my passenger door. Removed interior panels and found two empty holes (with black sealant) at the bottom front. The door and window all work fine. On other photos from various websites these two holes are also empty with no bolt or screws in them? Should there be something attached here? Just curious...

    20180129_140018_resized.jpg
    20180129_140035_resized.jpg

    Robert
    Belfast
    Vin #3915

  2. #2
    Senior Member
    Join Date:  Nov 2013

    Location:  NYS

    Posts:    2,074

    My VIN:    Formerly 10372, currently 4728

    I think those are where the bottom of the OEM window motor bracket attached. Is that a replacement window motor?

    This thread shows a pic of the OEM bracket (post #1, pic #5.) http://dmctalk.org/showthread.php?82...t=window+motor
    Last edited by Rich_NYS; 01-30-2018 at 12:30 AM.
    VIN 4728 is on the road...

  3. #3
    Senior Member DMC-81's Avatar
    Join Date:  Apr 2014

    Location:  Florida

    Posts:    1,419

    My VIN:    <2000

    Club(s):   (DCF)

    Agreed. Here is my same door before I removed the original window motor. It had the same black RTV.



    I only reused one of the two holes with my A1 replacement motors:



    Afterwards, I just filled in the unused hole with RTV again.
    Dana

    Delorean status: CECF 2017 Platinum Award winner. Still tinkering...

    Pictures and comments of my restoration journey are in the albums section on my profile.

    .

  4. #4
    Member
    Join Date:  Jun 2011

    Posts:    44

    I bought my car in Kansas MI in 1990 and a previous owner must have replaced the original power window motor hence the two empty holes. Mystery solved. Thanks guys.

    Robert
    Belfast
    Vin #3915

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •