Can someone post a photo of how the parking brake cable is supposed to route from the driver side caliper? It seems the cable wants to be routed where the end of the aluminum debris shield is and is fighting with the shield every time I drive, so much that it has cut its own groove down the end of the shield. Every speed bump or slight dip I hit makes a banging noise that is eased every time I move the cable from the end of the shield but the cable keeps moving back and the noise keeps coming back. I have DPI stainless parking brake mounting brackets, I doubt that makes a difference though. I also might as well preemptively say it - I'm going to keep the debris shields installed.
Thanks guys.