I am currently in the process of putting together a PRV engine with a 3.0L block, and 2.8L Heads / crank.
Unfortunately when I acquired my car the 2.8 had a hole in the VOD which prompted the strip-down of the relatively low-mile engine... but in doing so, I managed to snap off a number of bolts on the heads (all 4 intake bolts, most of the passenger side exhaust bolts, plus a couple more misc bolts). I now realize that the cost associated with extracting these bolts and repairing the threads / installing inserts is likely going to be more than the heads are worth. The aluminum on this block and on the heads is in terrible shape - even both of the engine mounts on the lower crankcase snapped in two when I attempted to pull the engine, then pretty much proceeded to turn to dust in my hands!
Anyhow - just checking if anyone has a clean set of 2.8L heads for sale. Would love to find a set of reworked heads to save me some time, but would also be interested in a decent pair to be rebuilt. The valvetrain and cams from my heads are fine, so that is not a requirement.