The metal cigarette lighter fits into a plastic piece in the console. How does one get the plastic piece out? I need to replace the little bulb that illuminates it. I don't want to break the plastic piece and I'm not seeing how it comes out.
Location: Houston
Posts: 706
My VIN: 16113
Club(s): (SCDC) (DCUK)
The metal cigarette lighter fits into a plastic piece in the console. How does one get the plastic piece out? I need to replace the little bulb that illuminates it. I don't want to break the plastic piece and I'm not seeing how it comes out.
Shannon
Location: San Francisco Bay Area, Calif.
Posts: 2,084
My VIN: 0934
Club(s): (NCDMC) (DCUK)
One way to get to that bulb is to pull the console cover, the piece with the ashtray in it, and turn it over. I think the bulb is on the outside of the body of the lighter.
Corrections anybody?
Location: Northern Michigan
Posts: 1,147
My VIN: 1880
Club(s): (DCO) (DCUK)
Take off the shifter surround by removing the two phillips head screws. Once removed, pry up the armrest section just enough to get your hand underneath it. The plastic holder that the bulb inserts into should be able to be pulled out from the bottom of the plastic lighter assembly ring. Replace the bulb, reinsert the plastic bulb holder (making sure the metal prong is making contact with the metal part of the lighter socket) and you should be back in business. Its a very easy job.
Patrick C.
VIN 1880
Posts: 4,808
My VIN: 3937
Yes, accessed (easier) from below with the console out.
My replacement is this one from the Vanagon website. It shows the bulb housing as the black component on the edge. As a bonus, this one fits nowadays cell phone car chargers properly.
http://www.gowesty.com/ec_view_details.php?id=4471
(search on their website for "illuminated lighter assembly" if the link doesn't work).
I don't really remember how the bulb goes in or out though...
IMG_3191.jpg
Sept. 81, auto, black interior
Location: Renton, WA
Posts: 342
My VIN: 02261
Club(s): (PNDC)
For those who need a picture or two to help get the Cigar Lighter metal socket out please see post number 4 in the thread below
Loose in my Cigar Lighter
http://dmctalk.org/showthread.php?36...-Cigar-Lighter
Jonathan thanks for posting that link to a replacement Cigar Lighter. I’m ordering one right now as I’m not happy with my existing one although I don’t plan on getting rid of my original DeLorean part.
Mark Vanyo
Links to DeLorean related web sites!
http://dmctalk.org/showthread.php?19...s-Part-I-of-II.
FYI
To get the plastic ring out, just pull the metal center part first. Then the plastic ring could be removed. The metal part holds some clips in the plastic ring.
But as suggested, replacing the bulb is done from the bottom.
Dave M vin 03572
http://dm-eng.weebly.com/
Location: Northern NJ
Posts: 8,582
My VIN: 10757 1st place Concourse 1998
Be very gentle with the plastic parts. They are old and brittle and won't take much abuse before breaking. Same bulb for the headlight switch and hazard switch so if they are burnt out too, get some extras.
David Teitelbaum
Location: Houston
Posts: 706
My VIN: 16113
Club(s): (SCDC) (DCUK)
Bummer. I have an automatic and it's a bigger pain to disassemble to shifter in order to get the console out.
Shannon
Location: Bay Area, CA
Posts: 266
My VIN: 15190
Reviving an old thread - I replaced the cigarette light bulb with no issues, however the lighter base is a little loose...
Any advice on how to tighten it?
Sent from my iPhone using Tapatalk
Location: Bay Area, CA
Posts: 266
My VIN: 15190
Sent from my iPhone using Tapatalk