FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 4 of 4

Thread: WTB Ground Effects Front Spoiler

  1. #1
    Senior Member kbrown84's Avatar
    Join Date:  Oct 2013

    Location:  Indianapolis, IN

    Posts:    106

    My VIN:    REDACTED

    WTB Ground Effects Front Spoiler

    My car has the DMCH ground effects kit, but its missing the front piece on the lower spoiler! Any body have one??

    Thanks!
    Kolin Brown
    El Presidente
    Indiana DeLorean Motor Club


    VIN 3513 (I think), 1.9L VW TDI (ALH) swap, UN1 trans, mechanical injection, Holset HE200WG turbo, Certified Shitbox
    Find me on Tubi! Rally North America

    "If you can't convince them, confuse them." - Harry S. Truman

  2. #2
    EFI'd dn010's Avatar
    Join Date:  Jul 2011

    Location:  Florida: Pinellas County

    Posts:    2,096

    My VIN:    5003 Never placed Concourse

    Club(s):   (DCF)

    Contact DMCH and they'll likely sell you the piece you need. The rear most part that goes under the rear bumper and across to the valance effects fell off on mine once and they sold me just that piece alone but this was a decade or so ago.

    FWIW, I took the front piece off my car - you do nothing but clip parking stones and rub the asphalt every single time there is an awkward incline, it gets destroyed quick.
    -----Dan B.

  3. #3
    Senior Member
    Join Date:  May 2011

    Location:  Burnsville MN-Moving to Kalispell MT. in June 20111

    Posts:    886

    My VIN:    2691

    ground "defects"

    I made some ground effect "spoilers" from some 1/4" rubber
    bailer belt from Fleet Farm. Been on for 30? years, still look good.

  4. #4
    EFI'd dn010's Avatar
    Join Date:  Jul 2011

    Location:  Florida: Pinellas County

    Posts:    2,096

    My VIN:    5003 Never placed Concourse

    Club(s):   (DCF)

    Quote Originally Posted by SS Spoiler View Post
    I made some ground effect "spoilers" from some 1/4" rubber
    bailer belt from Fleet Farm. Been on for 30? years, still look good.
    I remember you mentioning that before and I thought this was a great idea, there is just way too much for the fiberglass one to get caught up on, especially on a lowered D and mine didn't last more than a year or two until the corner broke off. It also needed constant painting from damaging it and road debris. Not only that, it's enough that everyone looks at you when you go down the road but when you grind the front of your car pulling off a road into an entrance that has an incline, it's pretty embarrassing.

    Nonetheless if you call DMCH and they won't sell one, as a last resort I still have mine - it's obviously damaged but can easily be repaired.
    Last edited by dn010; 04-27-2018 at 02:41 PM.
    -----Dan B.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •