Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13

Thread: Air Conditioning Fix

  1. #11
    President, DeLorean Industries
    Join Date:  May 2011

    Location:  CLE/PHX

    Posts:    2,339

    My VIN:    5646,5080, 5880, 10234, 3639, 2518, 10586, 1538

    Reusable clips that allow for complete orientation during install. Crimps are one time use and require orientation during assembly or the line is not clicked properly. That would not be the correct terminology to refer to it as a crimp.

  2. #12
    Gess dodint's Avatar
    Join Date:  Nov 2015

    Location:  Pittsburgh, PA

    Posts:    237

    My VIN:    10439

    Happy to see the positive reviews of the DPI lines as Josh is currently installing them on my car at the moment.

  3. #13
    Senior Member DMC-81's Avatar
    Join Date:  Apr 2014

    Location:  Florida

    Posts:    1,570

    My VIN:    <2000

    Club(s):   (DCF)

    Quote Originally Posted by Delorean Industries View Post
    Reusable clips that allow for complete orientation during install. Crimps are one time use and require orientation during assembly or the line is not clicked properly. That would not be the correct terminology to refer to it as a crimp.
    Not to nit-pick, but here is the product video on Eaton's website. Note at 2:46 the narrator states to "crimp" the two clips.

    http://videos.eaton.com/detail/video...toStart%3Dtrue

    I don't doubt the "cages" and the hose barbs in the fastening system are re-usable, but I wouldn't reuse those style clips, unless we are talking about a different system than pictured on your website.

    Again, I'm not knocking it, just clarifying the vendor options for the original poster.

    --------------------------------
    Rick, the best news is that A/C hoses are not unicorns... There are several options as seen in this thread.

    For example, if you want to go it alone, then you can also re-use the original hose ends (if they are still good) by carefully cutting off the crimp and recrimping them on new hoses with a new crimp sleeve. This requires a proper crimping machine like one that an A/C business that custom makes hoses does.

    This is mainly advisable if you want to keep your custom OEM "Pad blocks" that connect the hoses horizontally to the compressor, if that's important to you. Like so:


    Otherwise, you mostly have to go with a 90 degree "GM pad block" version like so:
    https://www.ebay.com/itm/GM-Compress...-/252196507456

    The other fittings are common so you'll want to get new ones. You can see all the options on a website to build your own ...like Cold Hose. https://coldhose.com/

    Hose sizes are:

    5/16" hose size (liquid line)
    13/32" hose size (high pressure)
    5/8" hose size (Suction/low pressure) You can get a reduced barrier hose as this one is sometimes hard to fit along the frame.
    Etc. for other parts & fittings.

    I think it's much less hassle to get hoses at the vendor of your choice though.
    Last edited by DMC-81; 05-23-2018 at 09:21 PM.
    Dana

    1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
    Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
    2006 Dodge Magnum R/T (D/D)
    2010 Camaro SS (Transformers Edition)

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •