Results 1 to 2 of 2

Thread: Orange County DeLorean Club

  1. #1
    10515 dtavres's Avatar
    Join Date:  Nov 2015

    Location:  Orange, CA

    Posts:    158

    My VIN:    10515

    Club(s):   (PNDC)

    Post Orange County DeLorean Club

    For those in Orange County, California, check out the Orange County DeLorean Club!

    Website: www.OCDeLoreans.com
    Facebook: www.facebook.com/OCDeLoreans
    Twitter: www.twitter.com/OCDeLoreans
    Instagram: www.instagram.com/OCDeLoreans
    Email: contact@OCDeLoreans.com
    OCDCLogo3.jpg
    Dave Tavres | dave@tavres.com | #10515 | Orange, CA | Southern California | www.DMC10515.com |

  2. #2
    10515 dtavres's Avatar
    Join Date:  Nov 2015

    Location:  Orange, CA

    Posts:    158

    My VIN:    10515

    Club(s):   (PNDC)

    Recap: Great Day Changing Oil

    www.OCDeLoreans.com/recap-great-day-changing-oil

    We had three DeLoreans show up for the “DeLorean Oil Change Day“, and it was a great experience! We all learned some things, we got our hands dirty, we got to connect and learn more about each other, and we got the oil changed on three DeLoreans with no issues – other than cooking in the 91 degree heat, with the sun right on us. Thankfully, with the garage and the pop-up tent, the sun didn’t cook us.

    We all ended up buying the same oil – the Castrol GTX 20W-50 Conventional Motor Oil, in 5 Quart jugs – and we all used the Bosch oil filter listed on the DeLorean Directory Crossover Parts page. Each 5 qt. jug of oil was about $20 including tax, and the filters were about $4 each. And since each of us used about seven of the 10 quarts, we still have some left over for the next oil change.

    One person successfully installed Toby Peterson’s EZ Oil Drain Valve, but there was an issue with the second car. The oil pan was a bit too low, so there wasn’t enough room to install the valve and have it work as expected. Possibly due to old/crushed/bad motor mounts, or the engine being shifted forward a tiny bit. We went back to the original plug and crush-washer.

    On the third DeLorean, we were going to install the new drain valve, so we didn’t have new crush-washers. So, rather than chance taking the plug out and having to re-use another crush-washer, we used an oil siphon-pump to extract the oil from the engine. It got almost all of the oil out, without trying very hard. Overall, a success with siphon-pump – although there’s no way to tell if there was any debris left in the pan.

    We also did some work installing one of Toby’s Wing-A-Loft systems, but not finishing it completely. That will happen soon though.
    Don’t miss out on the next Orange County DeLorean Club event or get-together. Great conversation and great learning!

    www.OCDeLoreans.com/recap-great-day-changing-oil
    Dave Tavres | dave@tavres.com | #10515 | Orange, CA | Southern California | www.DMC10515.com |

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •