Front Turn Signals are dim with Headlight switch on

[DMC5180]

Thanks for this suggestion, I'll flip those connections, as I didn't do the High Beam lights when I installed the whole set. Hopefully this will solve my "dim bulb" problem in the high beam lights too.

In my further testing yesterday, I found the 1157 LEDs don't work very well at flashing. I replaced them with the 1157 incandescent bulb, and flashing is normal.

Not sure what you mean by don’t flash very well. Fix the headlight issue first then test the signals again.

My LED signals flash at a normal rate. It’s just that they go ON/OFF instantly.
They ramp up/down like a a traditional filament bulb.

Are your Halo housings full LED or H4’s

What do you have in the Inner High beam locations?


Sent from my iPhone using Tapatalk