Hey Guys,

I just recently got my d and I am still not 100% on how the PRV v6 should idle but for some reason for the past couple rides it was feeling a little off. However once it got going it seemed to drive and perform without issue. I took it out today and was noticing a small hiss sound and it had trouble starting. I also noticed it was hunting for idle which was new. I went to start it again after letting it sit for a bit and it made what I can only describe as a small backfire and then would no longer start at all. After checking all my air hoses, I started tracing out the fuel lines and sure enough one of the fuel injectors was loose sitting about a half an inch high. I'm thinking when I heard that backfire it popped out, and was probably just loose before that. I was able to stick it back in and noticed the clip only holds it in loosely. I was able to bend the prongs on the clip so it holds in tight now. I also checked the other injectors and they all seemed tight. I was curious if anyone else has had issues with these clips? Should I replace that one, or all of them? It seems to fit tight now but it has me worried. Last thing I want is an injector coming out and spraying fuel on the engine while driving down the highway at 88MPH! Great Scott! After getting it put back together the car started right up and does not seem to hunt at idle even in the slightest. In fact the idle seems right on and the engine very responsive when sitting and revving or driving the car through time. The hiss sound is gone as well. The fuel lines are all already ss, I have included a link with a picture of the injector and clip in question. Any advice would be appreciated.

https://photos.app.goo.gl/duj516aZNy4cXrQ29