FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 9 of 9

Thread: Complete Working K Jet System + extras

  1. #1
    Senior Member
    Join Date:  Feb 2013

    Location:  FL

    Posts:    947

    My VIN:    Early

    Complete Working K Jet System + extras

    So here's my KJet system. Everything was in good working condition when removed, and everything pictured is included.


    Mixture Unit w/Fuel Distributer (Ran great, even has pipe of agony o ring cup installed!): $475
    IMG_20180702_2041385.jpgIMG_20180702_2041501.jpg

    Warm Up Regulator: $170
    IMG_20180702_2006003.jpg

    Frequency Valve: $145
    IMG_20180702_2019349.jpg

    Cold Start Valve: $50
    IMG_20180702_2006256.jpg

    Idle Speed Motor w/pipe of agony: $100
    IMG_20180702_2006175.jpg

    Throttle Butterfly w/Gary's machined spacer (has good decel springs): $175
    IMG_20180702_2037122.jpgIMG_20180702_2045415.jpg

    Bulkhead Mounting L plate: $120
    IMG_20180702_2011101.jpg

    Fiberglass Bulkhead Wiring/Coil Cover (has a few stratches): $50
    IMG_20180702_2011165.jpg

    DPI Stainless AC idler brackets w/stock pulleys: $50
    IMG_20180702_2010328.jpg

    8mm Spark Plug Wire Set (nice condition, used for 2,000 miles): $35
    IMG_20180702_2017381.jpg

    W pipe: $50
    IMG_20180702_2045461.jpg

    Intake manifold: $350
    IMG_20180702_2050585.jpg

    Ignition Distributer: $90
    IMG_20180702_2052417.jpg


    This time, ALL prices include shipping to the lower 48 states. PM if you're outside of the lower 48 for an adjusted price.
    Early 81 5spd conversion- DMCH Ground Effects, Double Din, Custom Instrument Cluster, QA1 Suspension, 3.0 PRV with MS3

  2. #2
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,380

    My VIN:    16409

    I'm interested in the coil cover and stainless AC brackets/pulleys.
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  3. #3
    President, DeLorean Industries
    Join Date:  May 2011

    Location:  CLE/PHX

    Posts:    2,588

    My VIN:    5646,5080, 5880, 10234, 3639, 2518, 10586, 1538

    We will take the fuel distributor and warm ref. Sent you email regarding payment.
    www.deloreanindustries.com Every Detail Matters

  4. #4
    Senior Member
    Join Date:  Feb 2013

    Location:  FL

    Posts:    947

    My VIN:    Early

    Quote Originally Posted by Delorean Industries View Post
    We will take the fuel distributor and warm ref. Sent you email regarding payment.
    Sorry Josh, DeLoreanGo Arran beat you to it!


    The following has been sold!:
    Ignition Distributor
    Warm Up Regulator
    Mixture Unit w/Fuel Distributor
    Cold Start Valve
    Throttle Butterfly
    Bulkhead Mounting L plate
    Frequency Valve
    Early 81 5spd conversion- DMCH Ground Effects, Double Din, Custom Instrument Cluster, QA1 Suspension, 3.0 PRV with MS3

  5. #5
    Senior Member
    Join Date:  Feb 2013

    Location:  FL

    Posts:    947

    My VIN:    Early

    W pipe is SOLD!
    Early 81 5spd conversion- DMCH Ground Effects, Double Din, Custom Instrument Cluster, QA1 Suspension, 3.0 PRV with MS3

  6. #6
    Senior Member
    Join Date:  Feb 2013

    Location:  FL

    Posts:    947

    My VIN:    Early

    Sale pending on coil cover, ac pulleys...

    The intake manifold, the idle speed motor, and the spark plug wires are still available.

    Also, lambda ecu is available in another thread
    Early 81 5spd conversion- DMCH Ground Effects, Double Din, Custom Instrument Cluster, QA1 Suspension, 3.0 PRV with MS3

  7. #7
    Senior Member
    Join Date:  Feb 2013

    Location:  FL

    Posts:    947

    My VIN:    Early

    Coil cover and AC idler pulleys are SOLD!

    Still available:
    intake manifold
    idle speed motor
    spark plug wires
    Early 81 5spd conversion- DMCH Ground Effects, Double Din, Custom Instrument Cluster, QA1 Suspension, 3.0 PRV with MS3

  8. #8
    Senior Member Trstno1's Avatar
    Join Date:  Aug 2014

    Location:  Anchorage, Alaska

    Posts:    847

    My VIN:    5625

    Quote Originally Posted by 81dmc View Post
    Coil cover and AC idler pulleys are SOLD!

    Still available:
    intake manifold
    idle speed motor
    spark plug wires

    Where were the spark plug wires purchased? What brand are they?
    You can't buy happiness, but you can buy a DeLorean and that's sort of the same thing....

  9. #9
    Senior Member
    Join Date:  Feb 2013

    Location:  FL

    Posts:    947

    My VIN:    Early

    Quote Originally Posted by Trstno1 View Post
    Where were the spark plug wires purchased? What brand are they?
    They are Hervey wires (he actually makes good ones).

    Not sure about the brand as I'm currently in Florida. All I know is they are 8mm.
    Early 81 5spd conversion- DMCH Ground Effects, Double Din, Custom Instrument Cluster, QA1 Suspension, 3.0 PRV with MS3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •