So here's my KJet system. Everything was in good working condition when removed, and everything pictured is included.
Mixture Unit w/Fuel Distributer (Ran great, even has pipe of agony o ring cup installed!): $475
IMG_20180702_2041385.jpgIMG_20180702_2041501.jpg
Warm Up Regulator: $170
IMG_20180702_2006003.jpg
Frequency Valve: $145
IMG_20180702_2019349.jpg
Cold Start Valve: $50
IMG_20180702_2006256.jpg
Idle Speed Motor w/pipe of agony: $100
IMG_20180702_2006175.jpg
Throttle Butterfly w/Gary's machined spacer (has good decel springs): $175
IMG_20180702_2037122.jpgIMG_20180702_2045415.jpg
Bulkhead Mounting L plate: $120
IMG_20180702_2011101.jpg
Fiberglass Bulkhead Wiring/Coil Cover (has a few stratches): $50
IMG_20180702_2011165.jpg
DPI Stainless AC idler brackets w/stock pulleys: $50
IMG_20180702_2010328.jpg
8mm Spark Plug Wire Set (nice condition, used for 2,000 miles): $35
IMG_20180702_2017381.jpg
W pipe: $50
IMG_20180702_2045461.jpg
Intake manifold: $350
IMG_20180702_2050585.jpg
Ignition Distributer: $90
IMG_20180702_2052417.jpg
This time, ALL prices include shipping to the lower 48 states. PM if you're outside of the lower 48 for an adjusted price.