Results 1 to 3 of 3

Thread: Connector to door lock housing - which wire goes to which door?

  1. #1
    Builder of the first Delorean Time Machine
    Join Date:  May 2011

    Location:  atlanta, ga, usa, earth, sol, milky way

    Posts:    1,055

    My VIN:    2072

    Club(s):   (SEDOC) (DCUK)

    Connector to door lock housing - which wire goes to which door?

    For some reason, the previous owner of 2072 decided to cut the wires that drive the solenoids from the door lock connector, and install spade connectors on both sides. They also removed all the pins/sockets from the car's side of the connector.

    I have NO idea why they would do that, but now I'm trying to make sense of the mess. I know there are Red/White and Red/Grey wires, and I know which set goes to which door, but I don't know where, in the lock controller's housing, they should be.

    In this photo, can someone tell me which wire from the driver side and passenger side door goes in which slot on the connection?

    IMG_5737.jpg

  2. #2
    Senior Member DMC-81's Avatar
    Join Date:  Apr 2014

    Location:  Florida

    Posts:    1,721

    My VIN:    <2000

    Club(s):   (DCF)

    Hi, does this schematic help?:
    http://dmctalk.org/showthread.php?11...dule-Schematic

    Specifically the photo in post 5...

    Also, based on my testing, the red/gray(slate) wires are the lock circuit in the solenoids if that helps:
    http://dmctalk.org/showthread.php?13...l=1#post197812
    Last edited by DMC-81; 07-29-2018 at 09:46 PM.
    Dana

    1981 DeLorean DMC-12 (5 Speed, Gas Flap, Black Interior, Windshield Antenna, Dark Gray)
    Restored as "mostly correct, but with flaws corrected". Pictures and comments of my restoration are in the albums section on my profile.
    2006 Dodge Magnum R/T (D/D)
    2010 Camaro SS (Transformers Edition)

  3. #3
    Builder of the first Delorean Time Machine
    Join Date:  May 2011

    Location:  atlanta, ga, usa, earth, sol, milky way

    Posts:    1,055

    My VIN:    2072

    Club(s):   (SEDOC) (DCUK)

    Quote Originally Posted by DMC-81 View Post
    Hi, does this schematic help?:
    http://dmctalk.org/showthread.php?11...dule-Schematic

    Specifically the photo in post 5...

    Also, based on my testing, the red/gray(slate) wires are the lock circuit in the solenoids if that helps:
    http://dmctalk.org/showthread.php?13...l=1#post197812
    Ah, that link is perfect. Thanks!

    I'm going to replace the door lock module, and install new pins in the housing once it all gets here.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •