FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
DMCH fuel pump
Has anyone with a DMCH fuel pump PN#107000 performed the mod explained by SB-07-10/2017. The inertia switch when activated does not cut off the fuel pump. The fix calls for cutting the secondary ground on the fuel sending unit side (3 wire connector). Anyone cut this? and did it have any effect on the way the fuel gauge works?
Thanks.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules