Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13

Thread: Door launcher relay question

  1. #11
    Gess dodint's Avatar
    Join Date:  Nov 2015

    Location:  Pittsburgh, PA

    Posts:    277

    My VIN:    10439

    Mattaligner is great if you can get one.

    Was surprised how subtle but effective the wrist guard is.

  2. #12
    Senior Member
    Join Date:  May 2011

    Location:  Las Vegas

    Posts:    574

    My VIN:    6720

    Club(s):   (AZ-D) (LVDG)

    Quote Originally Posted by Michael View Post
    If the switches are stuck then it is most likely due to the center "armrest" portion of the console has collapsed. This happens as people use it as a brace to get in and out. I had an issue with my switches sticking (especially the larger led window switches) and I solved it by placing stiff closed cell foam under the console next to the ashtray. This wedges between the console and underbody and raises the console back to a factory height and frees up and sticking switches.
    The Mattaligner has nothing but positive reviews but I don't know if it address that issue. I was under the impression it restored the broken down switch cutouts to align the switches all nice and neat. It may fix both issues?
    It doesnít address that issue directly, but solves the problem caused by it. (I had that problem as well- sticky switches againstvthe armrest.) The mattaligner blocks the console from touching the switches with the aft guard, *and* aligns/straightens the switches in a row.
    5 speed, grooved hood, grey interior (Nov '81)
    Spax Shocks, DCUK springs, Delorean.eu LCA brackets, DPNW Poly swaybar bushings, DMCMW shock tower bar, Deloreana.com convex mirrors, DPNW Toby Tabs, DPI cat-less exhaust, C4 Corvette third brake light, PJ Grady tail light boards, Bitsyncmaster relays

  3. #13
    Member
    Join Date:  Aug 2018

    Posts:    55

    Quote Originally Posted by jackb View Post
    It doesnít address that issue directly, but solves the problem caused by it. (I had that problem as well- sticky switches againstvthe armrest.) The mattaligner blocks the console from touching the switches with the aft guard, *and* aligns/straightens the switches in a row.
    Good stuff. Iíll check it out.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •