Results 1 to 6 of 6

Thread: crooked headlight

  1. #1
    Junior Member
    Join Date:  Feb 2013

    Posts:    8

    crooked headlight

    Hi How do you straighten a crooked headlight?
    thanks

  2. #2
    Senior Member DMC5180's Avatar
    Join Date:  May 2011

    Location:  Reedsburg, WI

    Posts:    3,784

    My VIN:    5180

    Club(s):   (DMWC) (DCUK)

    A photo would help us see what your seeing.


    Sent from my iPhone using Tapatalk
    DENNIS

    VIN 5180, Frame 3652, STAGE I, DM-eng Solid State Solutions (RPM Rly, Dm.Lt.Mod., Fan Fail Mod. , FAN Rly, HS.Rly) , HID sealed beam style headlights, SPAX user since 2009, Eibach springs, Mid-State Club Adj. Rear LCA's, DPNW poly-sway bar kit, DMCEU LCA Stabilizer link kit, DMCMW Illuminated door sills, Aussie Illuminated SS Shifter plate, GENUINE MOMO EVO Steering wheel, DELOREANA Extended View Side Mirrors w/ Heaters, DELOREANA LED Door Lights.

  3. #3
    Senior Member Gregadeth's Avatar
    Join Date:  Jun 2011

    Location:  Los Angeles, CA

    Posts:    348

    My VIN:    6472

    My guess is one or more of the plastic nuts that the headlight adjustment screw goes into is worn out or messed up. Or one of the adjustment screws has come out of place.

  4. #4
    Senior Member
    Join Date:  Jun 2011

    Posts:    4,277

    My VIN:    3937

    All the headlights get adjusted the same way. Each light has two adjustment screws and a spring to counter the adjustments. One screw basically lets you do up and down and the other does left and right.

    In theory, it's a simple thing to adjust. In reality, it can be a pain in the rump, mostly because time and the weather aren't kind to the screws or the housings that hold everything. And to access those things to replace them you need to take the fascia off. Which can be a stinker of a job. Not terribly difficult, just a lot of effort to get at the lights. Good time to clean up everything else up front though since it's all coming off and will need to go back together. Good time to repair or replace the rockscreen underneath while in there.

    Here's the headlights page on Houston's website: http://store.delorean.com/c-341-3-5-...tem-front.aspx

    The entire housing is here: http://store.delorean.com/p-6883-hea...g-assy-lh.aspx

    That's the driver's side one. If you need the passenger side, you'll likely go get it from Ed in Europe as he has had them remade.

    You can buy the screws and plastic nuts separately too if you only need those. The spring tensioners as well are available.

    I did mine last winter as they were a wee bit rusty and wouldn't adjust.

    delorean-left-headlamp-assembly.jpgIMG_0134.jpg


    Sept. 81, auto, black interior

  5. #5
    Delorean Guru
    Join Date:  May 2011

    Location:  Northern NJ

    Posts:    6,727

    My VIN:    10757

    Club(s):   (DMA)

    If the headlight is crooked it could be because one of the aligner screws is not properly positioned or a spring is out of place. Or maybe the metal clamp that holds the headlight is loose. You have to take things apart and see what the problem is. Very common for the screws to be all rusty so you might have to drill them out and replace them. If the buckets (the part that holds the bulb) are very badly rusted you might have to replace them. Be gentle with the finisher pieces between the headlights, they are very brittle. You will have to bend the rubber fascia a little to get to all of the screws.
    David Teitelbaum

  6. #6
    Junior Member
    Join Date:  Feb 2013

    Posts:    8

    Quote Originally Posted by DMC5180 View Post
    A photo would help us see what your seeing.


    Sent from my iPhone using Tapatalk
    sorry i was having a problem posting the pic from my phone.
    bucket.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •