FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
-
nice job
the glue seems much easier than mine.. I have seals that go around and they are quite difficult to get around the fixed glass section..
-
Senior Member
Originally Posted by
painterdave72
the glue seems much easier than mine.. I have seals that go around and they are quite difficult to get around the fixed glass section..
you saying that just made me realize that there was a seal for this.... oh... Well, I just packed it with black silicone and smoothed it out. Hope it works or I'll be doing it again. It looks much nicer than before.
-
ha
it looks good like u have it.. hopefully it will not leak but it shouldn't..
-
Senior Member
Originally Posted by
painterdave72
it looks good like u have it.. hopefully it will not leak but it shouldn't..
I went out and checked it out, they seem pretty solid, I may need to adjust the track a bit, but it seems pretty good.
-
EFI'd
Been there recently as well. http://dmctalk.org/showthread.php?16...Divide-Channel
I am not aware of a seal used for this, I do know there is seal 101726 for the inside of the divider where the drop glass sits once the window is up but I didn't see anything for the fixed glass side.
My channels came out of the car with some sort of wire running down the channel but it was filled with adhesive. So to reinstall it I scrapped all the old crap out of the channel. I used urethane for mine, trimmed it after it dried - it looks like it did when I got the car and I've had no issues since.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules