FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
3D Printable Time Machine Parts Project
So they are lots of 3d printable parts on Thingiverse...I made a collection for ease of browsing them (Thanks to everyone that posted them). I would like to model as many of the remaining pieces as possible. Anybody want to help? (I can share the fusion 360 project i think) All models will eventually be freely available on thingiverse once they are finalized.
things I am drafting
mymodels.jpg
printable models already on Thingiverse (https://www.thingiverse.com/kgp4deat...tions/delorean)
deloreanthings.jpg
I will be posting my progress on the project here.
-
Senior Member
Originally Posted by
kgp4death
So they are lots of 3d printable parts on Thingiverse...I made a collection for ease of browsing them (Thanks to everyone that posted them). I would like to model as many of the remaining pieces as possible. Anybody want to help? (I can share the fusion 360 project i think) All models will eventually be freely available on thingiverse once they are finalized.
things I am drafting
mymodels.jpg
printable models already on Thingiverse (
https://www.thingiverse.com/kgp4deat...tions/delorean)
deloreanthings.jpg
I will be posting my progress on the project here.
Coolness!
-
Senior Member
This is awesome! I'm not hardcore enough to source and pay for screen accurate parts, but I could see myself someday printing and painting parts that are accurate enough for me. Replica time machine parts for the people!
-
Originally Posted by
DavidProehl
This is awesome! I'm not hardcore enough to source and pay for screen accurate parts, but I could see myself someday printing and painting parts that are accurate enough for me. Replica time machine parts for the people!
You got it that is exactly what I am going for. This would not be for the hardcore "must be exact model no matter the cost people" but for the budget build people which would like a good amount of visual/dimentional accuracy for the cost of time and abs plastic.
-
here is my model for today the the clare-electroseal corp box C2277-EI better known as that random golden box on center console....again if any one wants to help/check my measurements whatever pm your email
ClareboxModel.jpg
-
So I figured out how to share my files for now links self update, you can look at rotate,measure things, markup, and add comments and criticisms (so I can fix things). You can also download files and stl files to print and modify(but sorry to say they will have no connection to self update my files-you would still need to give me your email for that), but for more complex items you want to download the fusion file and export each object as a separate stl....that said these are still not fully ready to go and some are very raw (but good start,they will be on thingiverse once they are 99%)....oh and if you are goingto try toprint something make sure it is in petg or abs or poly carbonate. If you are looking into buying a 3d printer look at the cr-10 (but you will need an enclosure for abs, i just have 2 10$ ikea tables on top of each other.
Golden Claire Electrical Box
(center console in front of flux capacitor)
want to still model some switches and things for the really lazy to find parts people but close
https://a360.co/2EGlT1J
Mount for Green bowling pin torpedo things
(these are meant to be used with the models already on thingiverse for the Green tube things)
https://a360.co/2ECs2fa
Vent Plates(rear driver side exterior)
pretty close to done found all the real dimensions
https://a360.co/2EGxuOb
Black Boxes for Dash Board
(still need to adjust some dimensions and model internals)
https://a360.co/2EM5zfZ
Heat sink for on top of the big zero box exterior behind the passager
this is a re-mix of the plutonium chamber heat sinks they are similar but different sizes.
close but needs a hole for the wire protector things (and also need to model those too)
https://a360.co/2TvV8ql
Actual big zero box with connector for orange jantrol tube built in
https://a360.co/2EKM8UB
Extinguisher holder for near the flux capacitor
still needs a lot of work
https://a360.co/2EGSB34
flux band bracket
will need to be printed in flexible filament or printed hard just to make the mold.
https://a360.co/2EK6yxe
Plutonium Chamber (screw version)
very inaccurate but dont think there was a chamber for the plutonium to fall into, and modified for lid to screw in instead of just one Quarter turn for more security from it falling off. I will model the normal version too.
https://a360.co/2TyJSJL
Plutonium Chamber Lid
(working but inaccurate screw version- these all work with turbine thing already on thingiverse that goes above hubcap. )
https://a360.co/2ELlDOU
Plutonium Chamber Insert With Plutonium drop slot
(also inaccurate, but official version was bolted in and to get the plutonium you would have to open the whole thing or grab them from under neath hoping they didn't fall in to engine.(i think,correct me if i am wrong).Again I will model normal version too.
https://a360.co/2IYGnrY
Delorean relay holder behind passenger
(might model the relays for completeness but they are like 5$ cheap)
https://a360.co/2EGEriu
Wire Coupling thing used all over
will eventually be several versions for all the types/sizes around car
https://a360.co/2TlRUWU
Twin zero boxes near green tubes
https://a360.co/2IZCMtP
-
Senior Member
Sweet! Looks like you have my Wormhole Emitter (which I do need to update now..).
Glad to see the rest too! I’m going to try making a model of the Mr. Fusion base as a one piece model, vs the ones there that are all segments and incomplete.
-
Cool man and thanks again for the wormhole emitter model that was one of the nicer models of anything I have ever found of anything, so detailed and awesome.
-
Senior Member
Originally Posted by
kgp4death
Cool man and thanks again for the wormhole emitter model that was one of the nicer models of anything I have ever found of anything, so detailed and awesome.
Stop you’re making me blush..
Anyway, glad you like it!
And btw I will be offering it soon on my site as well, both raw printed and finished versions for a TON less than what some of the other time machine parts guys charge.
-
cool you finally got a printer saw you were looking for a service there for a little while. Also feel free to print any of my stuff anyone want's i do not have that kinda time to help people print stuff.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules