FRAMING JOHN DELOREAN - AT THEATERS THIS WEEKEND & ON VOD www.framingjohndeloreanfilm.com
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: 3D Printable Time Machine Parts Project

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date:  Oct 2015

    Location:  Rhode Island

    Posts:    26

    My VIN:    it's over 9000....well 3070

    3D Printable Time Machine Parts Project

    So they are lots of 3d printable parts on Thingiverse...I made a collection for ease of browsing them (Thanks to everyone that posted them). I would like to model as many of the remaining pieces as possible. Anybody want to help? (I can share the fusion 360 project i think) All models will eventually be freely available on thingiverse once they are finalized.

    things I am drafting
    mymodels.jpg

    printable models already on Thingiverse (https://www.thingiverse.com/kgp4deat...tions/delorean)
    deloreanthings.jpg

    I will be posting my progress on the project here.

  2. #2
    Senior Member cpistocco's Avatar
    Join Date:  Jun 2013

    Location:  Cranston, RI

    Posts:    327

    My VIN:    4941

    Quote Originally Posted by kgp4death View Post
    So they are lots of 3d printable parts on Thingiverse...I made a collection for ease of browsing them (Thanks to everyone that posted them). I would like to model as many of the remaining pieces as possible. Anybody want to help? (I can share the fusion 360 project i think) All models will eventually be freely available on thingiverse once they are finalized.

    things I am drafting
    mymodels.jpg

    printable models already on Thingiverse (https://www.thingiverse.com/kgp4deat...tions/delorean)
    deloreanthings.jpg

    I will be posting my progress on the project here.
    Coolness!

  3. #3
    Senior Member DavidProehl's Avatar
    Join Date:  May 2011

    Location:  Maple Grove, MN (Minneapolis)

    Posts:    1,290

    My VIN:    05457

    This is awesome! I'm not hardcore enough to source and pay for screen accurate parts, but I could see myself someday printing and painting parts that are accurate enough for me. Replica time machine parts for the people!
    David Proehl

  4. #4
    Junior Member
    Join Date:  Oct 2015

    Location:  Rhode Island

    Posts:    26

    My VIN:    it's over 9000....well 3070

    Quote Originally Posted by DavidProehl View Post
    This is awesome! I'm not hardcore enough to source and pay for screen accurate parts, but I could see myself someday printing and painting parts that are accurate enough for me. Replica time machine parts for the people!
    You got it that is exactly what I am going for. This would not be for the hardcore "must be exact model no matter the cost people" but for the budget build people which would like a good amount of visual/dimentional accuracy for the cost of time and abs plastic.

  5. #5
    Junior Member
    Join Date:  Oct 2015

    Location:  Rhode Island

    Posts:    26

    My VIN:    it's over 9000....well 3070

    here is my model for today the the clare-electroseal corp box C2277-EI better known as that random golden box on center console....again if any one wants to help/check my measurements whatever pm your email



    ClareboxModel.jpg

  6. #6
    Junior Member
    Join Date:  Oct 2015

    Location:  Rhode Island

    Posts:    26

    My VIN:    it's over 9000....well 3070

    So I figured out how to share my files for now links self update, you can look at rotate,measure things, markup, and add comments and criticisms (so I can fix things). You can also download files and stl files to print and modify(but sorry to say they will have no connection to self update my files-you would still need to give me your email for that), but for more complex items you want to download the fusion file and export each object as a separate stl....that said these are still not fully ready to go and some are very raw (but good start,they will be on thingiverse once they are 99%)....oh and if you are goingto try toprint something make sure it is in petg or abs or poly carbonate. If you are looking into buying a 3d printer look at the cr-10 (but you will need an enclosure for abs, i just have 2 10$ ikea tables on top of each other.




    Golden Claire Electrical Box
    (center console in front of flux capacitor)
    want to still model some switches and things for the really lazy to find parts people but close
    https://a360.co/2EGlT1J

    Mount for Green bowling pin torpedo things
    (these are meant to be used with the models already on thingiverse for the Green tube things)
    https://a360.co/2ECs2fa

    Vent Plates(rear driver side exterior)
    pretty close to done found all the real dimensions
    https://a360.co/2EGxuOb

    Black Boxes for Dash Board
    (still need to adjust some dimensions and model internals)
    https://a360.co/2EM5zfZ

    Heat sink for on top of the big zero box exterior behind the passager
    this is a re-mix of the plutonium chamber heat sinks they are similar but different sizes.
    close but needs a hole for the wire protector things (and also need to model those too)
    https://a360.co/2TvV8ql

    Actual big zero box with connector for orange jantrol tube built in
    https://a360.co/2EKM8UB

    Extinguisher holder for near the flux capacitor
    still needs a lot of work
    https://a360.co/2EGSB34

    flux band bracket
    will need to be printed in flexible filament or printed hard just to make the mold.
    https://a360.co/2EK6yxe

    Plutonium Chamber (screw version)
    very inaccurate but dont think there was a chamber for the plutonium to fall into, and modified for lid to screw in instead of just one Quarter turn for more security from it falling off. I will model the normal version too.
    https://a360.co/2TyJSJL

    Plutonium Chamber Lid
    (working but inaccurate screw version- these all work with turbine thing already on thingiverse that goes above hubcap. )
    https://a360.co/2ELlDOU

    Plutonium Chamber Insert With Plutonium drop slot
    (also inaccurate, but official version was bolted in and to get the plutonium you would have to open the whole thing or grab them from under neath hoping they didn't fall in to engine.(i think,correct me if i am wrong).Again I will model normal version too.
    https://a360.co/2IYGnrY

    Delorean relay holder behind passenger
    (might model the relays for completeness but they are like 5$ cheap)
    https://a360.co/2EGEriu

    Wire Coupling thing used all over
    will eventually be several versions for all the types/sizes around car
    https://a360.co/2TlRUWU

    Twin zero boxes near green tubes
    https://a360.co/2IZCMtP

  7. #7
    Senior Member Timebender's Avatar
    Join Date:  Nov 2011

    Location:  Jamul, CA

    Posts:    1,484

    My VIN:    07000

    Sweet! Looks like you have my Wormhole Emitter (which I do need to update now..).

    Glad to see the rest too! Iím going to try making a model of the Mr. Fusion base as a one piece model, vs the ones there that are all segments and incomplete.

  8. #8
    Junior Member
    Join Date:  Oct 2015

    Location:  Rhode Island

    Posts:    26

    My VIN:    it's over 9000....well 3070

    Cool man and thanks again for the wormhole emitter model that was one of the nicer models of anything I have ever found of anything, so detailed and awesome.

  9. #9
    Senior Member Timebender's Avatar
    Join Date:  Nov 2011

    Location:  Jamul, CA

    Posts:    1,484

    My VIN:    07000

    Quote Originally Posted by kgp4death View Post
    Cool man and thanks again for the wormhole emitter model that was one of the nicer models of anything I have ever found of anything, so detailed and awesome.
    Stop youíre making me blush..

    Anyway, glad you like it!

    And btw I will be offering it soon on my site as well, both raw printed and finished versions for a TON less than what some of the other time machine parts guys charge.

  10. #10
    Junior Member
    Join Date:  Oct 2015

    Location:  Rhode Island

    Posts:    26

    My VIN:    it's over 9000....well 3070

    cool you finally got a printer saw you were looking for a service there for a little while. Also feel free to print any of my stuff anyone want's i do not have that kinda time to help people print stuff.

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •