So I figured out how to share my files for now links self update, you can look at rotate,measure things, markup, and add comments and criticisms (so I can fix things). You can also download files and stl files to print and modify(but sorry to say they will have no connection to self update my files-you would still need to give me your email for that), but for more complex items you want to download the fusion file and export each object as a separate stl....that said these are still not fully ready to go and some are very raw (but good start,they will be on thingiverse once they are 99%)....oh and if you are goingto try toprint something make sure it is in petg or abs or poly carbonate. If you are looking into buying a 3d printer look at the cr-10 (but you will need an enclosure for abs, i just have 2 10$ ikea tables on top of each other.
Golden Claire Electrical Box
(center console in front of flux capacitor)
want to still model some switches and things for the really lazy to find parts people but close
https://a360.co/2EGlT1J
Mount for Green bowling pin torpedo things
(these are meant to be used with the models already on thingiverse for the Green tube things)
https://a360.co/2ECs2fa
Vent Plates(rear driver side exterior)
pretty close to done found all the real dimensions
https://a360.co/2EGxuOb
Black Boxes for Dash Board
(still need to adjust some dimensions and model internals)
https://a360.co/2EM5zfZ
Heat sink for on top of the big zero box exterior behind the passager
this is a re-mix of the plutonium chamber heat sinks they are similar but different sizes.
close but needs a hole for the wire protector things (and also need to model those too)
https://a360.co/2TvV8ql
Actual big zero box with connector for orange jantrol tube built in
https://a360.co/2EKM8UB
Extinguisher holder for near the flux capacitor
still needs a lot of work
https://a360.co/2EGSB34
flux band bracket
will need to be printed in flexible filament or printed hard just to make the mold.
https://a360.co/2EK6yxe
Plutonium Chamber (screw version)
very inaccurate but dont think there was a chamber for the plutonium to fall into, and modified for lid to screw in instead of just one Quarter turn for more security from it falling off. I will model the normal version too.
https://a360.co/2TyJSJL
Plutonium Chamber Lid
(working but inaccurate screw version- these all work with turbine thing already on thingiverse that goes above hubcap. )
https://a360.co/2ELlDOU
Plutonium Chamber Insert With Plutonium drop slot
(also inaccurate, but official version was bolted in and to get the plutonium you would have to open the whole thing or grab them from under neath hoping they didn't fall in to engine.(i think,correct me if i am wrong).Again I will model normal version too.
https://a360.co/2IYGnrY
Delorean relay holder behind passenger
(might model the relays for completeness but they are like 5$ cheap)
https://a360.co/2EGEriu
Wire Coupling thing used all over
will eventually be several versions for all the types/sizes around car
https://a360.co/2TlRUWU
Twin zero boxes near green tubes
https://a360.co/2IZCMtP