FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 29

Thread: Fuel, Engine and Manual Transmission Components

  1. #1
    Senior Member mr_maxime's Avatar
    Join Date:  Mar 2015

    Posts:    1,243

    My VIN:    10201

    Fuel, Engine and Manual Transmission Components

    I will be updating this list as I pull items off my car. Prices do not include shipping. Parts are located in Newnan, GA. Currently, I have available:

    DMCH Modern Fuel Pump complete. Installed back in late Aug 2017. $300
    Idle Speed ECU $300
    ECU Lambda silver $125
    Carbon Canister, includes bracket, bezel and hoses attached $100
    Gas Cap $10
    Gas Filler (seal included) $60
    Filler pipe w/clamps $50
    Roll over valve $15
    Vent hose w/clamps $10
    Ignition module $175
    Distributor Cap (New) $15
    Water pump core $100. I replaced this while changing the hoses in the VOD only because I was there. There were no issues as far as I know.
    NOS 21 spline clutch plate $125

    Anyone needing a major component is welcome to come help me remove it from the car (engine/transmission)

  2. #2
    Senior Member OverlandMan's Avatar
    Join Date:  May 2011

    Location:  Rowlett, TX

    Posts:    1,533

    My VIN:    5482

    are you selling the gearbox and parts for that as well? (pedal box, shifter, linkage, etc.)
    Jeff

  3. #3
    Senior Member hippieman9's Avatar
    Join Date:  Jan 2018

    Location:  Mebane, NC

    Posts:    346

    My VIN:    06668 81' Grey interior, 5 speed, Grooved hood. Previous owner of 16301, in 2001. Found Nov 2019, a

    PM sent

  4. #4
    Senior Member mr_maxime's Avatar
    Join Date:  Mar 2015

    Posts:    1,243

    My VIN:    10201

    Quote Originally Posted by OverlandMan View Post
    are you selling the gearbox and parts for that as well? (pedal box, shifter, linkage, etc.)
    I will be. They are still on the car right now.

    Also, unless I specify, the components are used. My car was a daily driver for a while so they are all in generally functional condition.

  5. #5
    Senior Member OverlandMan's Avatar
    Join Date:  May 2011

    Location:  Rowlett, TX

    Posts:    1,533

    My VIN:    5482

    Quote Originally Posted by mr_maxime View Post
    I will be. They are still on the car right now.

    Also, unless I specify, the components are used. My car was a daily driver for a while so they are all in generally functional condition.
    Awesome. PM sent
    Jeff

  6. #6
    Senior Member
    Join Date:  May 2011

    Posts:    301

    My VIN:    02855

    Club(s):   (NCDMC) (DCUK)

    if the distributor cap is new Bosch unit, Ill take it.

  7. #7
    Senior Member mr_maxime's Avatar
    Join Date:  Mar 2015

    Posts:    1,243

    My VIN:    10201

    Quote Originally Posted by mark w View Post
    if the distributor cap is new Bosch unit, Ill take it.
    Pretty sure it's this one http://store.delorean.com/p-6833-cap-distributor.aspx . I bought it with the service kit but DMCMW ended up not putting it on.

    Feel free to request any parts if it's reasonably easy to remove. I'm jumping all over right now.


    Also available 2 DMC rpm relays $20 each, 1 Hervey relay $15
    Nick R's transmission coupler $175 (never installed)

  8. #8
    absotively posilutely bytes311's Avatar
    Join Date:  Sep 2014

    Location:  Modesto, CA

    Posts:    319

    Club(s):   (NCDMC) (DCUK)

    I'd be interested in the driver door mirror switch if it's available.

  9. #9
    Senior Member mr_maxime's Avatar
    Join Date:  Mar 2015

    Posts:    1,243

    My VIN:    10201

    Ha i still need those. Only parts that run the engine or run off the engine will be available.

  10. #10
    absotively posilutely bytes311's Avatar
    Join Date:  Sep 2014

    Location:  Modesto, CA

    Posts:    319

    Club(s):   (NCDMC) (DCUK)

    Quote Originally Posted by mr_maxime View Post
    Ha i still need those. Only parts that run the engine or run off the engine will be available.
    Ahhh gotcha! Sorry, I misread.

Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •