Here are some photos of the 4 sided new LEDs on the driver's side inner light (High beam) and the old 2 sided LED on the passenger side inner light(High beam). As you can see a big difference in the pattern. The old LED is more of a point of light. I wonder how the new ones will work as the low beam lights as far as aiming them. I also wonder if the housing would have different patterns from a better manufacture housing.
I took different exposures to try to get the result in the photo.
Edit:
I just bench tested one of the 4 sided LEDs and it looks better aiming the one light on my wall in that there is a flat light cutoff in the pattern. Also the low beam does move that cutoff position lower than the high beam. Don't know how it does that. So maybe using my garage door or the two lights at the same time gave me a poor test.