FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 2 of 2 FirstFirst 1 2
Results 11 to 15 of 15

Thread: Delorean Performance Industries Spec 1 Stainless Steel Exhaust

  1. #11
    EFI'd dn010's Avatar
    Join Date:  Jul 2011

    Location:  Florida: Pinellas County

    Posts:    2,077

    My VIN:    5003 Never placed Concourse

    Club(s):   (DCF)

    I've added lock washers on my bolts as well after losing a few. The heat shield is warped as expected from the heating/cooling - should I remove the lock washers now that the shield is set? I'd hate to have a bracket break...
    -----Dan B.

  2. #12
    President, DeLorean Industries
    Join Date:  May 2011

    Location:  CLE/PHX

    Posts:    2,549

    My VIN:    5646,5080, 5880, 10234, 3639, 2518, 10586, 1538

    Yes the shield needs to be able to deflect under different heat loads. The lock washers will force it to bind on the slots.
    www.deloreanindustries.com Every Detail Matters

  3. #13
    EFI'd dn010's Avatar
    Join Date:  Jul 2011

    Location:  Florida: Pinellas County

    Posts:    2,077

    My VIN:    5003 Never placed Concourse

    Club(s):   (DCF)

    Thanks for the fast reply, I'll remove them before any damage is done!
    -----Dan B.

  4. #14
    President, DeLorean Industries
    Join Date:  May 2011

    Location:  CLE/PHX

    Posts:    2,549

    My VIN:    5646,5080, 5880, 10234, 3639, 2518, 10586, 1538

    Its actually not the lock washer but the orientation of it. If it is installed where the cut on the washer can bind in the shield hole there will be a problem. If you want to use a concave tension washer this is safe to do as long as there isn't a serration pattern stamped. We install just the 1/4 -20 bolts and use the machined underside of the head for seating on the z bracket. This give the proper tension.
    www.deloreanindustries.com Every Detail Matters

  5. #15
    Senior Member
    Join Date:  Dec 2018

    Posts:    781

    Thought I would lend my two cents here. I installed the DPI exhaust and I am very pleased. I agonized for while before choosing this. The other venders may be excellent also, but I assure you will be happy with this. Of course, mine is their newest version. I guess they made a few changes based on customer responses. I can't say I would change anything on mine.

    -They look fantastic
    -They fit perfect
    -They do add some power (don't expect miracles)
    -The sound is ideal for me

    I will expand on the sound. It is slightly louder and more defined when idling or winding through the gears. But when you get to 60-80 cruising speed, it settles down to a nice background tone. It also makes a nice "burble" sound when you let off the throttle quickly. I have made a 700 mile trip (one way) and I'm completely happy with this exhaust.

    Of note, the tips are the most polished SS I have ever seen. I kind of prefer a brushed look there, but could not convince myself to scotch brite that beautiful finish. Lol.

Page 2 of 2 FirstFirst 1 2

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •