FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
New ball joint boots
I'm putting new boots on the steering ball joints. Some metal washers came off as I disassembled the right hand side (see photos):
P7226271.jpg
Here is the disassembled right ball joint.
P7226276.jpg
Here are the parts removed from the ball joint. Notice the metal washers.
P7226284.jpg
New boots.
P7226264.jpg
Here is a photo of the left ball joint just after I popped it out. Have not removed anything. Again notice the washer and remains of original boot.
The new boots didn't come with any washers. Obviously I need to reuse the original wound spring retainer to secure the bottom of the boot. Do I need to reuse any of the metal washers? It looks like the new boots don't need them.
Thanks for your help.
Ron
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules