Posts: 54
Hello gentlemen,
Just purchased some lower ball joints last week and upon receiving them, they are not exactly what I was expecting.
Has anyone seen this design before? There are no grease fittings (nor was there a COO designation anywhere on the packaging or the ball joints themselves, which I find strange).
Just looking for any information on these before I go to the trouble of pressing them in.
Thanks!
IMG_20190817_105208839.jpgIMG_20190817_105123589.jpgIMG_20190817_105227764.jpg
Last edited by JohnnyK; 08-17-2019 at 11:17 AM.
Location: Northwest Florida
Posts: 324
My VIN: Midproduction
Definitely a different part. What vendor?
Posts: 54
.. A big one (I don't want to go there yet until I know what I have. hah)
Thanks!
Posts: 54
Decided to pull the boot to see what was going on under there.
There appears to be a bit of yellow/orange grease, but also just a dollop of grey grease just on top of it (Not in the ball joint. Just kind of like a tiny blob was injected on top, so not really doing anything).
IMG_20190817_165608709.jpgIMG_20190817_165626595.jpg
Location: Fresno, CA.
Posts: 1,382
My VIN: 16409
DeLorean Go supplies the best ball joints on the market. Accept no substitutes.
Chris Miles
For Better or Worse I own a DeLorean!
1983 Grey Manual, VIN #16409, Fresno, California
Location: Norfolk, U.K.
Posts: 104
My VIN: 1764
Club(s): (DCH)
I would have to agree with Chris
They don't look familiar to me, or match any of the photos on the usual websites, assuming you mean a DeLorean specialist vendor.
Have you seen the 1000s of pages of lower ball joint and lower ball joint failure threads? Particularly the extensive research on taper angles etc....? The UK made one we sell (not the "UK style" copies) hopefully speaks for itself by now
Last edited by DeLoreanGo Arran; 08-17-2019 at 05:56 PM.
Posting Permissions
Reply With Quote