Low pressure port is
A) center on the back of ac compressor?
Or
B) outboard on the back of the AC compressor?
Location: Spokane
Posts: 128
My VIN: 5051
Low pressure port is
A) center on the back of ac compressor?
Or
B) outboard on the back of the AC compressor?
Location: North GA
Posts: 6,176
Club(s): (SEDOC) (DCUK)
On the back plate, there should be a large "S" = Suction = Low Side, and a large "D" = Discharge = High Side.
The "D" is USUALLY in the center as in the pic in this post:
http://dmctalk.org/showthread.php?17...l=1#post248725
Location: Spokane
Posts: 128
My VIN: 5051
Thanks Indeed it is! sorry got lazy for a minute.Originally Posted by Ron
Location: Illinois
Posts: 2,440
My VIN: 11408
Club(s): (DMWC) (TXDMC) (DCUK) (DOI)
To further add to this thread, the High side is the small hose, and the low side is the large hose.
Supercharged 5.3L LS4 + Porsche 6spd
[email protected]
lsdelorean.com
I am not affiliated with Delorean Midwest in anyway.
Location: Spokane
Posts: 128
My VIN: 5051
Yep just wanted to double check!
Got another question that I am not to concerned about yet but!
Just did a fuel pressure check Engine off 40F and got 25 psi control and 80 main held 40 psi after disconnecting the Fuel pump Jumper for at least 20 mins.
Does this sound about right?
Location: North GA
Posts: 6,176
Club(s): (SEDOC) (DCUK)
Yes, good readings!
Location: Spokane
Posts: 128
My VIN: 5051
Awesome thanks!
Posting Permissions
Reply With Quote