Something very frustrating I learned tonight thanks to Mark's help is that even though you have a 5-speed car and I have seen many people say you can ditch the red bulkhead harness. ...pin #18 must remain or be routed to a ground. It is the white/yellow wire that grounds the neutral safety switch/ starter inhibit solenoid and if it is not grounded your starter will not work !!!. So I added a new wire and grounded it to the intake for now. I will relocate as I finalize the wiring .
IMG_20191216_210843~2.jpg
Last edited by powerline84; 12-17-2019 at 12:17 AM.
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
I know but I want to keep the Delorean wiring not related to fuel injection stock.
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
IMG_20200201_175613.jpgIMG_20200201_171704.jpgIMG_20200201_173949.jpg
Had some spare time to work on my car.
Now that the car runs I am finalizing the install and the wiring . The engine harness is almost done. Running a plug for the EFI harness in place of the old kjet connectors. It's a wx tight connector. I'll end up pro sealing a patch or riveting a patch over the small open hole. Then finalize the interior side of the harness. Slowly coming together.
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
IMG_20200216_140209~2.jpgIMG_20200216_135930.jpgIMG_20200216_132403.jpgIMG_20200216_132802.jpg
Waterproof gm wx connector style harness complete. Tapped into rpm relay circuit and pulled wires from socket. Megasquirt controlls the fuel pump through origional wires via a gm 2 piece connector.
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
IMG_20200321_084535.jpgIMG_20200322_134238.jpg
Finalizing details of the fine details lol finishing build. Eventually I write a detailed guide for what I did and post in the thread.
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
Location: Cookeville, TN
Posts: 321
My VIN: 628
Club(s): (SEDOC) (DCUK)
Looking good brother! Can't wait to see MCFRY wheeling around