So, I just went out and checked some of the wiring. It looks like the two pins at the sensor plug are shorted together... is that normal? I even pulled the two white bulkhead connectors and they're still shorted together at the TTS connector.
What I mean is that WR (32) is shorted to UB (47). Any ideas where these wires may be shorted?
edit
I found that the CSV has those pins shorted. When I pulled the plug on it, the short went away. I'm guessing that's normal? Seems that the wiring is good and separate from the TTS plug to the bulkhead and to the CSV.
end edit