FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Engine Parts For Sale

  1. #1
    Senior Member mluder's Avatar
    Join Date:  May 2011

    Location:  Happy Valley, OR

    Posts:    1,703

    My VIN:    4456 - Owner since March 2011

    Club(s):   (PNDC)

    Engine Parts For Sale

    Doing some early spring cleaning and it's time to let go of a few things.
    Pricing does not include shipping but I will provide a quote at the time of purchase and you have the opportunity to back out.
    Shipping will be whatever method is least expensive.
    US buyers only.

    Timing chain and rocker valve covers. All are in good structural condition but needs bead blasting and paint:
    Timing chain cover - $150
    Rocker Valve Covers - $100 each
    IMG_0070.jpg
    IMG_0071.jpg

    Throttle assembly. Fully functional. Replaced only for appearance. - $180
    IMG_0063.jpg
    IMG_0064.jpg

    Stock muffler mounts. All are in good structural condition but needs bead blasting and paint or zinc plating. Removed only because I went Stage II
    Upper mount - $30
    Lower Left - $20
    Lower Right - $20
    IMG_0065.jpg
    IMG_0066.jpg
    I also have a complete stock exhaust and muffler system. All in good condition. Cast iron headers and muffler were recently porcelain coated.
    Message or respond if you want to discuss purchase.

    Finally I also have some pieces from the stock fuel pump assembly.
    My pump was going so I replaced it with the DMC all-in-one.
    These parts are no longer available so make an offer.
    IMG_0062.jpg

    Cheers
    Steven
    Cheers
    Steven Maguire
    #4456


    IT'S A TRAP!!!!!

  2. #2
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,290

    My VIN:    16409

    Do you have a metal heat-shield for the original muffler or the original asbestos?
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  3. #3
    Senior Member mluder's Avatar
    Join Date:  May 2011

    Location:  Happy Valley, OR

    Posts:    1,703

    My VIN:    4456 - Owner since March 2011

    Club(s):   (PNDC)

    Quote Originally Posted by Chris 16409 View Post
    Do you have a metal heat-shield for the original muffler or the original asbestos?
    Sorry - I do not.
    The original asbestos was pretty far gone. I replaced it with an aftermarket metal one. That one I do have.

    Steve
    Cheers
    Steven Maguire
    #4456


    IT'S A TRAP!!!!!

  4. #4
    Senior Member
    Join Date:  May 2011

    Posts:    132

    My VIN:    02855

    Club(s):   (NCDMC) (DCUK)

    Ill take the two lower muffler brackets together for $40

    Mark
    Member- Norcal Delorean Owners Group
    Owner- Vin 2855 "The Mongoose DeLorean"

    Follow the Mongoose DeLorean on Facebook here
    https://www.facebook.com/The-Mongoos...01004553571091

  5. #5
    Senior Member mluder's Avatar
    Join Date:  May 2011

    Location:  Happy Valley, OR

    Posts:    1,703

    My VIN:    4456 - Owner since March 2011

    Club(s):   (PNDC)

    Quote Originally Posted by mluder View Post
    Doing some early spring cleaning and it's time to let go of a few things.
    Pricing does not include shipping but I will provide a quote at the time of purchase and you have the opportunity to back out.
    Shipping will be whatever method is least expensive.
    US buyers only.

    Timing chain and rocker valve covers. All are in good structural condition but needs bead blasting and paint:
    Timing chain cover - $150
    Rocker Valve Covers - $100 each
    IMG_0070.jpg
    IMG_0071.jpg

    Throttle assembly. Fully functional. Replaced only for appearance. - $180
    IMG_0063.jpg
    IMG_0064.jpg

    Stock muffler mounts. SALE IS PENDING
    All are in good structural condition but needs bead blasting and paint or zinc plating. Removed only because I went Stage II
    Upper mount - $30
    Lower Left - $20
    Lower Right - $20
    IMG_0065.jpg
    IMG_0066.jpg
    I also have a complete stock exhaust and muffler system. All in good condition. Cast iron headers and muffler were recently porcelain coated.
    Message or respond if you want to discuss purchase.

    Finally I also have some pieces from the stock fuel pump assembly.
    My pump was going so I replaced it with the DMC all-in-one.
    These parts are no longer available so make an offer.
    IMG_0062.jpg

    Cheers
    Steven
    See above...
    Cheers
    Steven Maguire
    #4456


    IT'S A TRAP!!!!!

  6. #6
    Senior Member mluder's Avatar
    Join Date:  May 2011

    Location:  Happy Valley, OR

    Posts:    1,703

    My VIN:    4456 - Owner since March 2011

    Club(s):   (PNDC)

    Quote Originally Posted by mark w View Post
    Ill take the two lower muffler brackets together for $40

    Mark
    Hi, Mark

    Just messaged you - Sale is pending but your next in line if it doesn't go.

    Cheers
    Steven
    Cheers
    Steven Maguire
    #4456


    IT'S A TRAP!!!!!

  7. #7
    10515 dtavres's Avatar
    Join Date:  Nov 2015

    Location:  Las Vegas, NV

    Posts:    184

    My VIN:    10515

    Club(s):   (PNDC)

    Quote Originally Posted by mluder View Post
    Sorry - I do not.
    The original asbestos was pretty far gone. I replaced it with an aftermarket metal one. That one I do have.
    How much for the metal heat shield? (and can you share a photo of it?)

    Thanks

  8. #8
    Senior Member mluder's Avatar
    Join Date:  May 2011

    Location:  Happy Valley, OR

    Posts:    1,703

    My VIN:    4456 - Owner since March 2011

    Club(s):   (PNDC)

    Quote Originally Posted by dtavres View Post
    How much for the metal heat shield? (and can you share a photo of it?)

    Thanks
    Sorry for the delayed response... Need to change setting so I'm notified when responses occur...
    Let me dig it out... Give me a day or so.

    Cheers
    Steven
    Cheers
    Steven Maguire
    #4456


    IT'S A TRAP!!!!!

  9. #9
    Senior Member mluder's Avatar
    Join Date:  May 2011

    Location:  Happy Valley, OR

    Posts:    1,703

    My VIN:    4456 - Owner since March 2011

    Club(s):   (PNDC)

    OK... Muffler brackets sold...
    Will take offers on any of the rest of it.
    Willing to part off the exhaust too if offers are reasonable.

    Cheers
    Steve

    Quote Originally Posted by mluder View Post
    Doing some early spring cleaning and it's time to let go of a few things.
    Pricing does not include shipping but I will provide a quote at the time of purchase and you have the opportunity to back out.
    Shipping will be whatever method is least expensive.
    US buyers only.

    Timing chain and rocker valve covers. All are in good structural condition but needs bead blasting and paint:
    Timing chain cover - $150
    Rocker Valve Covers - $100 each
    IMG_0070.jpg
    IMG_0071.jpg

    Throttle assembly. Fully functional. Replaced only for appearance. - $180
    IMG_0063.jpg
    IMG_0064.jpg

    Stock muffler mounts. All are in good structural condition but needs bead blasting and paint or zinc plating. Removed only because I went Stage II
    Upper mount - $30
    Lower Left - $20
    Lower Right - $20
    IMG_0065.jpg
    IMG_0066.jpg
    I also have a complete stock exhaust and muffler system. All in good condition. Cast iron headers and muffler were recently porcelain coated.
    Message or respond if you want to discuss purchase.

    Finally I also have some pieces from the stock fuel pump assembly.
    My pump was going so I replaced it with the DMC all-in-one.
    These parts are no longer available so make an offer.
    IMG_0062.jpg

    Cheers
    Steven
    Cheers
    Steven Maguire
    #4456


    IT'S A TRAP!!!!!

  10. #10
    Senior Member mluder's Avatar
    Join Date:  May 2011

    Location:  Happy Valley, OR

    Posts:    1,703

    My VIN:    4456 - Owner since March 2011

    Club(s):   (PNDC)

    Quote Originally Posted by dtavres View Post
    How much for the metal heat shield? (and can you share a photo of it?)

    Thanks
    Sorry I'm behind on this - I'll pull it out in the next day or so and get a picture.

    Cheers
    Steven
    Cheers
    Steven Maguire
    #4456


    IT'S A TRAP!!!!!

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •