Engine Parts For Sale

[mluder]

Doing some early spring cleaning and it's time to let go of a few things.
Pricing does not include shipping but I will provide a quote at the time of purchase and you have the opportunity to back out.
Shipping will be whatever method is least expensive.
US buyers only.

Timing chain and rocker valve covers. All are in good structural condition but needs bead blasting and paint:
Timing chain cover - $150
Rocker Valve Covers - $100 each
IMG_0070.jpg
IMG_0071.jpg

Throttle assembly. Fully functional. Replaced only for appearance. - $180
IMG_0063.jpg
IMG_0064.jpg

Stock muffler mounts. All are in good structural condition but needs bead blasting and paint or zinc plating. Removed only because I went Stage II
Upper mount - $30
Lower Left - $20
Lower Right - $20
IMG_0065.jpg
IMG_0066.jpg
I also have a complete stock exhaust and muffler system. All in good condition. Cast iron headers and muffler were recently porcelain coated.
Message or respond if you want to discuss purchase.

Finally I also have some pieces from the stock fuel pump assembly.
My pump was going so I replaced it with the DMC all-in-one.
These parts are no longer available so make an offer.
IMG_0062.jpg

Cheers
Steven

[Chris 16409]

Do you have a metal heat-shield for the original muffler or the original asbestos?

[mluder]

Do you have a metal heat-shield for the original muffler or the original asbestos?

Sorry - I do not.
The original asbestos was pretty far gone. I replaced it with an aftermarket metal one. That one I do have.

Steve

[mark w]

Ill take the two lower muffler brackets together for $40

Mark

[mluder]

Doing some early spring cleaning and it's time to let go of a few things.
Pricing does not include shipping but I will provide a quote at the time of purchase and you have the opportunity to back out.
Shipping will be whatever method is least expensive.
US buyers only.

Timing chain and rocker valve covers. All are in good structural condition but needs bead blasting and paint:
Timing chain cover - $150
Rocker Valve Covers - $100 each
IMG_0070.jpg
IMG_0071.jpg

Throttle assembly. Fully functional. Replaced only for appearance. - $180
IMG_0063.jpg
IMG_0064.jpg

Stock muffler mounts. SALE IS PENDING
All are in good structural condition but needs bead blasting and paint or zinc plating. Removed only because I went Stage II
Upper mount - $30
Lower Left - $20
Lower Right - $20
IMG_0065.jpg
IMG_0066.jpg
I also have a complete stock exhaust and muffler system. All in good condition. Cast iron headers and muffler were recently porcelain coated.
Message or respond if you want to discuss purchase.

Finally I also have some pieces from the stock fuel pump assembly.
My pump was going so I replaced it with the DMC all-in-one.
These parts are no longer available so make an offer.
IMG_0062.jpg

Cheers
Steven

See above...

[mluder]

Ill take the two lower muffler brackets together for $40

Mark

Hi, Mark

Just messaged you - Sale is pending but your next in line if it doesn't go.

Cheers
Steven

[dtavres]

Sorry - I do not.
The original asbestos was pretty far gone. I replaced it with an aftermarket metal one. That one I do have.

How much for the metal heat shield? (and can you share a photo of it?)

Thanks

[mluder]

How much for the metal heat shield? (and can you share a photo of it?)

Thanks

Sorry for the delayed response... Need to change setting so I'm notified when responses occur...
Let me dig it out... Give me a day or so.

Cheers
Steven

[mluder]

OK... Muffler brackets sold...
Will take offers on any of the rest of it.
Willing to part off the exhaust too if offers are reasonable.

Cheers
Steve

Doing some early spring cleaning and it's time to let go of a few things.
Pricing does not include shipping but I will provide a quote at the time of purchase and you have the opportunity to back out.
Shipping will be whatever method is least expensive.
US buyers only.

Timing chain and rocker valve covers. All are in good structural condition but needs bead blasting and paint:
Timing chain cover - $150
Rocker Valve Covers - $100 each
IMG_0070.jpg
IMG_0071.jpg

Throttle assembly. Fully functional. Replaced only for appearance. - $180
IMG_0063.jpg
IMG_0064.jpg

Stock muffler mounts. All are in good structural condition but needs bead blasting and paint or zinc plating. Removed only because I went Stage II
Upper mount - $30
Lower Left - $20
Lower Right - $20
IMG_0065.jpg
IMG_0066.jpg
I also have a complete stock exhaust and muffler system. All in good condition. Cast iron headers and muffler were recently porcelain coated.
Message or respond if you want to discuss purchase.

Finally I also have some pieces from the stock fuel pump assembly.
My pump was going so I replaced it with the DMC all-in-one.
These parts are no longer available so make an offer.
IMG_0062.jpg

Cheers
Steven

[mluder]

How much for the metal heat shield? (and can you share a photo of it?)

Thanks

Sorry I'm behind on this - I'll pull it out in the next day or so and get a picture.

Cheers
Steven