FRAMING JOHN DELOREAN - ON VOD
www.framingjohndeloreanfilm.com
-
Senior Member
totally stumped! fuel pump not working
so i was driving and the car stalled. i have the dmc-h new fuel pump system.
i took a paperclip and jumped the rpm relay. nothing.
i checked inertia switch, its down.
checked fuse 7, its fine.
i checked voltage from the fuel pump harness and getting 12.5 volts.
i hooked up the pump with the module still connected straight to the battery and the pump will run.
I disconnected the three fuel senders wires since it ran without them when just connected to the battery and tried again and still the pump wont run with the rpm relay jumped even though the pump is getting 12.5 volts.
im totally stumped at this point.
any new takes on this would be appreciated.
Last edited by smallclone; 02-18-2020 at 10:24 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules