I’ll take a picture
Sent from my iPad using Tapatalk
Location: Asheville, N.C
Posts: 188
My VIN: Latest VIN 83
Club(s): (DCF) (NCDMC) (DCUK)
I’ll take a picture
Sent from my iPad using Tapatalk
Dave M vin 03572
http://dm-eng.weebly.com/
Location: Asheville, N.C
Posts: 188
My VIN: Latest VIN 83
Club(s): (DCF) (NCDMC) (DCUK)
Yeah actuators have been installed for years and working not sure of correctly but they appear too
Sent from my iPad using Tapatalk
Dave M vin 03572
http://dm-eng.weebly.com/
Location: Asheville, N.C
Posts: 188
My VIN: Latest VIN 83
Club(s): (DCF) (NCDMC) (DCUK)
Ok Got the lock unit back updated (thx Dave) and new wiper arm plus a new actuator from Toby installed on the driver door but even with the rods disconnected on the driver door lock doesn’t get thrown to the lock position (just half way)
There’s not much room to move the new solenoid. Either way.
Now By hand it’s ok but from opposite passenger door it doesn’t get thrown nor by remote.
Any suggestions obviously I’m not doing something right?
Appreciate it
Sent from my iPhone using Tapatalk
Dave M vin 03572
http://dm-eng.weebly.com/
+1 ...That was my first thought, but it bugs me that it was always able to move with all of the links connected (even if it did jamb up).
If you are up for a ~2 hour drive, I'll help you cuss it for free!
Location: Asheville, N.C
Posts: 188
My VIN: Latest VIN 83
Club(s): (DCF) (NCDMC) (DCUK)
So Progress, I started it up and it was working with all rear rods disconnected. Put those back on one by one an it works, except the rear lock latch rod.
I’ve tried adjusting that one but nothing seems to work?
Once I install it, it just binds everything up and causes problems.
Ron I don’t mind the drive at all what’s your schedule like next week?
I’ve been messing with this for far too long...lol
My email is 8< snip >8
Sent from my iPhone using Tapatalk
John, check your PMs for my phone #.
Location: Asheville, N.C
Posts: 188
My VIN: Latest VIN 83
Club(s): (DCF) (NCDMC) (DCUK)
Ok will do I’ll call either later today or Tues.
Sent from my iPhone using Tapatalk