"Well, I need to thank powerline84 because his suggestion worked!"
Glad I could help. Just paying it forward from all the guys who helped me.
"Well, I need to thank powerline84 because his suggestion worked!"
Glad I could help. Just paying it forward from all the guys who helped me.
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
Location: Illinois
Posts: 2,440
My VIN: 11408
Club(s): (DMWC) (TXDMC) (DCUK) (DOI)
I must bring this up again as it continually baffles me.
Why are people buying MS3x boxes to run fuel only batch firing setups. It is such a waste of a MS3
Supercharged 5.3L LS4 + Porsche 6spd
[email protected]
lsdelorean.com
I am not affiliated with Delorean Midwest in anyway.
Location: CLE/PHX
Posts: 2,592
My VIN: 5646,5080, 5880, 10234, 3639, 2518, 10586, 1538
I get the feeling it is more of a "testing the waters" thing with a few toes in. Gives room for improvement down the road. In most cases the installer gets it running fuel only and then updates it from there. I could be wrong and it might be a case of people just copying what others buy with no intention of further updates.
www.deloreanindustries.com Every Detail Matters
It does make certain things easier. A base MS2/3 runs short of inputs & outputs. 3X gives you these options more readily without repurposing status LEDs or other solder solutions most people probably wouldn't be comfortable with:
-VSS input
-AC control (1 in and 1 out)
-Check engine light
A companion BCM would probably better suit these goals, but I don't think any such thing exists yet.
Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection
I plan on expanding mine. I am not staying fuel only
There's your answer lol.
My You Tube Channel
https://youtube.com/@timelesssteelga...fOpBaYJDtDlkQx
My Build
http://dmctalk.org/showthread.php?14...-s-20-year-nap
This is the correct answer. I've already moved the cooling fans and a/c control to the MS and rigged up an output to use the Lambda light as a "check engine" light.
I bought the MS3X because of the expandability it offers. I can do anything I want to in the future without much headache. It has already completely changed the car in a positive way. I'm enjoying learning as I go. I haven't had this much fun in the garage in, well, a very long time.
Last edited by ramblinmike; 04-22-2020 at 11:03 PM.
Yeah, it's dirty. I drive it.
Location: Illinois
Posts: 2,440
My VIN: 11408
Club(s): (DMWC) (TXDMC) (DCUK) (DOI)
Supercharged 5.3L LS4 + Porsche 6spd
[email protected]
lsdelorean.com
I am not affiliated with Delorean Midwest in anyway.
That's awesome! I have no idea what I'm doing, so I went with what I thought would be easiest for me to use. I'm hoping to go ignition here before too long, hopefully with EDIS or something similar.
I'm having more fun with this thing than I can put into words. I've been driving the car at every opportunity for any pathetic reason I can muster. Josh, you should know that your LS4/Subaru conversion was what pushed me over the edge to start this MegaSquirt thing to begin with.
I stopped making excuses for what was annoying me about the car and decided to change it for the better.
Yeah, it's dirty. I drive it.
I'm wanting to go ignition control next, and I'd like to try and lose the distributor all together when I do this. In preparation, I got a PRV distributor off of eBay to play with.
IMG_3329.jpg
After some disassembly and cleaning
IMG_4934.jpg
What have you guys done for a cam signal? I've seen the optical conversions in another thread but I don't think I need anything with that kind of resolution. From what I've read I think I can get by with a single tooth setup and a trigger wheel on the crank pulley. Does anyone have pictures with what they've done for a single tooth setup using the stock distributor? I've read descriptions about what has been done but I was wondering if anyone had some pics they'd care to share. Thanks, appreciate the help so far!
Yeah, it's dirty. I drive it.
Gutted distributor and riveted / jbwelded (hell yeah jbweld) a single tooth on to the original pole piece.
CMP - Camshaft Position Sensor.jpg
The single tooth metal was an old pinball machine bracket. I tried to use as many old pinball machine parts as possible during my conversion LOL
More pics
Luke S :: 10270 :: 82 Grey 5-Speed :: Single Watercooled T3 .60/.48 :: Borla Exhaust :: MSD Ignition :: MS3X Fully SFI Odd-fire EFI :: DevilsOwn Methanol Injection