Hello all!
After a year-long hiatus or more (It’s the first year of our first child, so the DeLorean lovingly took a back seat for a while!), I have dusted it off and have dug into a few projects. The first was cleaning up the harness and defunct wiring mods in the interior. That went very well. However, upon trying to start the car today, I ran into issues. The first few cranks yielded nothing. The next two almost caught, but immediately died. I noticed a fuel smell and looked under the car. I saw drip, drip, drip near the accumulator... I looked into the center console access panel and saw the problem (I have not been able to lift the car yet so hoping this is the only issue). Where the feed line takes a turn to the accumulator and joins the flexible hose, I see a leak. I am a COMPLETE newbie at the fuel system (I can harness all day though) so forgive me if there are any obvious solutions or procedures. Assuming the pictured leak is the issue, is this as simple as clamping it? Can I do this from the access panel by un-bolting the elbow and lifting it up to clamp? Or do I have no clue how this might work?
Thank you in advanced!
BC9E3C07-3153-433D-9DFB-9EF17C71A8A2.jpg
94BA174C-8951-47DD-A4D9-2878A5180B21.jpg
AA8BD913-C7B5-4E57-BD7E-0261AB50D979.jpg