FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 3 of 3

Thread: Shift linkage problem?

  1. #1
    Junior Member
    Join Date:  Jun 2015

    Location:  Syracuse

    Posts:    27

    My VIN:    1704

    Shift linkage problem?

    All, I suddenly am difficulty shifting into first, second and reverse gear. Iíve got 3 months on my second delorean, and this problem just manifested. Iíve researched the DMC boards and it appears to me i might need a rebuild kit of the shift linkages. Interested in advice.

    Details.
    Clutch master, slave and braided lines are solid.
    I donít force the shifting, but the symptoms indicate bent roll-pins / pivot bolt (are those the same things?) When I try to get into first, second or reverse, I need to try several times, might work the first time or the up to the fifth, but if I continually try (without forcing) it will ultimately go into gear and then stay in gear normally.

    Based upon what I found on DMC talk, I think It might be worth rebuilding the shift linkage. Thanks for any recommendations in advance.

    #17009, Carl

  2. #2
    Senior Member Rich's Avatar
    Join Date:  May 2011

    Location:  San Francisco Bay Area, Calif.

    Posts:    1,676

    My VIN:    0934

    Club(s):   (NCDMC) (DCUK)

    Yes, rebuilding the linkage may solve the problem.

    It may not take all that, though. You may only need to adjust the shifter crossgate cable. The fact that the shifter recently went to a sometimes-works, sometimes-doesn't condition suggests something in the linkage is worn or loose to the point where it needs an adjustment.

    The How To section of this forum has Martin G's helpful video on the adj. procedure.

    3784-How-To-5-speed-linkage-and-crossgate-adjustment-(video)

    Check the bits at 1m20s and 2m20s times, especially the latter. He will explain which way to go on the crossgate cable to address your problem. Further on he will point out the pivot bolt. It's got nothing to do with the crossgate cable. The shift linkage roll pin is also described.

    The Workshop Manual describes the shift linkage adjustment procedure in Sec. F:07:01.
    Last edited by Rich; 05-22-2020 at 08:25 PM.
    March '81, 5-speed, black interior

  3. #3
    Senior Member Riley88's Avatar
    Join Date:  Oct 2014

    Location:  Virginia Beach, Virginia

    Posts:    436

    My VIN:    5312

    Shift linkage bushings yeh, had your exact problem in another car
    - OCT81 DeLorean DMC-12 Vin 5312 "DeLores"
    - 1978 Lotus Esprit S2 "Problem Child"
    - 1995 Mazda Miata Turbo "Happy Daily Driver"

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •