LED Lights Added, No Dirver's side lights

[Midnight Specialist]

Hi All,

I was swapping my lights out for LEDs and it was all going good until, I reinstalled the driver's side rear side marker and it went out along with the lights on the driver's side. The turn signals and break lights work along with the headlights, but no other lights. Has anyone ever had this happen? Suggestions?

[Riley88]

Which LED's are you going with? Remember LED's are polarity sensitive, you could have one backwards. Remove them 1 by one in the order you installed, see if the problem goes away as you go along imo. If you find the one that makes the others go out, flip it the other way. Simple test. Also welcome to the forum!

[David T]

Also check fuse # 2, 10 Amp. It is for the lamps on the left (driver's) side. Maybe you accidentally shorted the circuit or you have a bad bulb.

[Chris 16409]

Did you install LED bulbs in your headlight or hazard switches? Most if the LED Bulbs for those switches need to be modified or you can blow a fuse that also powers the side marker lights.

[Midnight Specialist]

Thanks guys. Found the issue. It was a blown fuse.