FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Results 1 to 3 of 3

Thread: Engine short block

  1. #1
    Senior Member
    Join Date:  May 2011

    Posts:    301

    My VIN:    02855

    Club(s):   (NCDMC) (DCUK)

    Engine short block

    Delorean engine short block (no heads) for possible rebuild

    Damage internally (due to bearing failure and debris) on all oil film surfaces-

    possible good core block for rebuild, no rot in deep holes.

    Scoring on liners, crank, oil pump bore, piston skirts, etc

    Damage level subjective to your inspection or your machine shop. As-is.

    Includes

    block upper/lower
    Oil pan
    Oil pickup
    Oil baffle plate
    Oil pump
    Crank
    Liners
    Liner hold down tools
    Pistons/rods/rings (not pictured)
    Timing chains/gears

    No covers or heads or rms housing

    $600 obo you pickup in San Jose CA

    DSC_0002.jpgDSC_0003.jpgDSC_0004.jpgDSC_0005.jpg
    Last edited by mark w; 07-26-2020 at 11:32 AM.

  2. #2
    Senior Member
    Join Date:  May 2011

    Posts:    301

    My VIN:    02855

    Club(s):   (NCDMC) (DCUK)

    still available


    Quote Originally Posted by mark w View Post
    Delorean engine short block (no heads) for possible rebuild

    Damage internally (due to bearing failure and debris) on all oil film surfaces-

    possible good core block for rebuild, no rot in deep holes.

    Scoring on liners, crank, oil pump bore, piston skirts, etc

    Damage level subjective to your inspection or your machine shop. As-is.

    Includes

    block upper/lower
    Oil pan
    Oil pickup
    Oil baffle plate
    Oil pump
    Crank
    Liners
    Liner hold down tools
    Pistons/rods/rings (not pictured)
    Timing chains/gears

    No covers or heads or rms housing

    $600 obo you pickup in San Jose CA

    DSC_0002.jpgDSC_0003.jpgDSC_0004.jpgDSC_0005.jpg

  3. #3
    Senior Member
    Join Date:  May 2011

    Posts:    301

    My VIN:    02855

    Club(s):   (NCDMC) (DCUK)

    This have this....and could ship this, I have an anvil style shipping case this would fit into.

    this engine had good oil pressure still before I took it out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •