FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: New plug-n-play Tailight Sequencer

  1. #1
    Member
    Join Date:  Jun 2016

    Location:  Oklahoma

    Posts:    75

    New plug-n-play Tailight Sequencer

    https://youtu.be/hxkKZDbabAA Here is a link to my new plug - n - play sequencer that is in the works.

  2. #2
    Senior Member - Owner since 2003 Patrick C's Avatar
    Join Date:  May 2011

    Location:  Northern Michigan

    Posts:    1,102

    My VIN:    1880

    Club(s):   (DCO) (DCUK)

    Quote Originally Posted by DeepSpace Cowboy View Post
    https://youtu.be/hxkKZDbabAA Here is a link to my new plug - n - play sequencer that is in the works.
    Very nice!!!
    Patrick C.
    VIN 1880
    Modifications done to my car can be seen in this video: https://youtu.be/ncMjW2pI2e4

  3. #3
    Member
    Join Date:  Feb 2013

    Posts:    67

    Looking good. Less than 500 bucks, I hope!

  4. #4
    Under Ron's watchful eye. Glory be to Ron! Michael's Avatar
    Join Date:  May 2011

    Posts:    4,126

    My VIN:    None of your business you creepy psycho vin counter...get a life

    Nice! So does this use the oe boards? Is it like an inline controller that plugs between the board and harness or a complete new board?

  5. #5
    Member
    Join Date:  Jun 2016

    Location:  Oklahoma

    Posts:    75

    Quote Originally Posted by Michael View Post
    Nice! So does this use the oe boards? Is it like an inline controller that plugs between the board and harness or a complete new board?
    It would be nice if I could come up with an in line module that just plugged in line with your original taillight boards. Unfortunately, Iím not that smart. I still have to purchase two new boards and modify them to work with my circuit. A module is attached to the modified boards but it is pretty small. The cost will be a lot cheaper than my original version.

  6. #6
    Daily Driver ssdelorean's Avatar
    Join Date:  May 2011

    Location:  NW Ohio

    Posts:    313

    My VIN:    16506

    Club(s):   (DCO) (DCUK)

    Quote Originally Posted by Patrick C View Post
    Very nice!!!
    What he said!
    Shannon Y
    www.ohiodeloreans.com
    www.facebook.com/ohiodeloreans
    ---
    1st angle drive - 58,027 miles (20 years) -- original
    2nd angle drive - 48,489 miles (21 years) -- original from donor
    3rd angle drive - 26,572 miles (2 years 3 months) -- DMCH
    4th angle drive - 21,988 miles (1 year 11 months) -- DMCH
    5th angle drive - 7,137 miles (10 months 2 days) -- DMCH
    6th angle drive - OVER 96,704 miles and counting (OVER 10 yr 10 months & counting) -- new Martin Gutkowski unit
    over 228K miles

  7. #7
    LS Swapper Josh's Avatar
    Join Date:  Mar 2013

    Location:  SK, Canada

    Posts:    2,105

    My VIN:    11408

    Club(s):   (TXDMC) (DOI)

    The timing is kind of poor, there is already a very polished sequential taillight board available through DMCNW.

    https://www.delorean-parts.com/produ...t7iCH-smP3j1Q8

    5.3L LS4 + Subaru 6spd 314whp/348ft-lbs
    Getting it back on the road!
    LS Swap

  8. #8
    Senior Member
    Join Date:  Jun 2016

    Location:  Austin MN

    Posts:    206

    My VIN:    03500

    To be fair it doesn't hurt to have competition.

    Deepspacecowboy had his gen 1 sequential lights out first. I have a set and they work great! They may not be as fancy but if there is a failure they can be reverted back to normal operation with the same boards without worry.

    Dave B.
    Last edited by WHO1DMC; 10-14-2020 at 02:19 PM.

  9. #9
    Member
    Join Date:  Jun 2016

    Location:  Oklahoma

    Posts:    75

    Quote Originally Posted by WHO1DMC View Post
    To be fair it doesn't hurt to have competition.

    Deepspacecowboy had his gen 1 sequential lights out first. I have a set and they work great! They may not be as fancy but if there is a failure they can be reverted back to normal operation with the same boards without worry.

    Dave B.
    Thank you! Thank you! I wanted to get a p-n-p unit out there thatís a lot cheaper to build.

  10. #10
    Under Ron's watchful eye. Glory be to Ron! Michael's Avatar
    Join Date:  May 2011

    Posts:    4,126

    My VIN:    None of your business you creepy psycho vin counter...get a life

    Quote Originally Posted by Josh View Post
    The timing is kind of poor, there is already a very polished sequential taillight board available through DMCNW.

    https://www.delorean-parts.com/produ...t7iCH-smP3j1Q8
    Which is out of stock.

    I don't know what it is but sequential DeLorean tailights are in like Pumpkin spice.

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •