Okay, so as the post states, I'm going to be pulling an engine out of my D, and transplanting another stock Delorean engine in it's place.
The engine I'm putting back into the car is in good shape and I'm not planning on taking it apart prior to re-installing it, so I'm not looking for tips on what to replace/refurb inside the engine itself. Only stuff that would be made inherently easier/recommended while an engine is out of the car.
Here is the list I have thought of so far:
1. Belts for the engine
2. Exhaust manifold gaskets (Since the exhaust has to come off for the engine to get pulled)
3. Read main seal
4. Engine mounts.
Anything else I should add to that list? Thanks!