FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Used OEM parts for sale

  1. #1
    Senior Member jmpdmc's Avatar
    Join Date:  May 2011

    Location:  Cranberry Twp., PA

    Posts:    116

    My VIN:    ex-01678

    Used OEM parts for sale

    I am cleaning out my basement stock of used OEM parts (unless otherwise noted) and wanted to post them here first. I have included the DMC part numbers for reference when applicable. Parts are located in PA, zip code 16066, and buyer will pay actual shipping cost + cost of part.

    Fan shroud 100487 $45.

    Attachment 65401Attachment 65400

    Fans + motor 100415 $20. for both
    Attachment 65402Attachment 65403

    Front springs 100413 $50.
    IMG_4207.jpg

    Lambda ECU 101068 $75.
    IMG_4204.jpgIMG_4205.jpg

    Ignition ECU 101055 $95.
    IMG_4202.jpgIMG_4203.jpg

    LED flasher relay (new unused) 100708A $5.
    IMG_4200.jpg

    Engine cover slider 106356 $10.
    IMG_4194.jpg

    License plate light brackets 108747 $8.
    IMG_4187.jpg

    L+R escutcheons 101888+101887 (clips are damaged) $20. for both
    IMG_4180.jpgIMG_4181.jpg

    Rear closing panel brackets 101546 $10. for both
    IMG_4177.jpgIMG_4178.jpg

    Red sidemarker lens 100790 (back removed for project but can be easily reattached) $15. for both
    IMG_4171.jpgIMG_4172.jpg

    Front parking lights 108057 (split apart for a project) $15. for both
    IMG_4166.jpgIMG_4164.jpg

    Front parking light sockets 106268 (one partly disassembled) $15. for both
    IMG_4160.jpg

    Grady taillight circuit board 101488 $45.
    IMG_4156.jpgIMG_4157.jpg

    OEM water pump 102119 (good for a core or a rebuild) $25.
    IMG_4149.jpgIMG_4150.jpg

    Aftermarket OEM style water pump (core or rebuild?) $25.
    IMG_4141.jpgIMG_4143.jpg

    Coolant reservoir brackets 105779 $15. for both
    IMG_4139.jpgIMG_4140.jpg

    Idler pulley bracket 100772 $25.
    IMG_4217.jpgIMG_4216.jpg

    Idler pulley bracket-small 100773 $20.
    IMG_4218.jpgIMG_4219.jpg

    Plug wire bracket 102272 $15.
    IMG_4025.jpgIMG_4027.jpg

    Auto transmission drain plug 103815 $5.
    IMG_4132.jpgIMG_4133.jpg

    Auto transmission oil cooler pipe with one fitting 100448 $50.
    IMG_4094.jpgIMG_4135.jpg

    Brake master cylinder and reservoir 109040 (good for core or rebuild) $40.
    IMG_4130.jpgIMG_4129.jpg

    Domed nut for OEM fuel pump 110589 $5.
    IMG_4114.jpgIMG_4115.jpg

    Fuel filler neck 101394 (one nut broke but could be repaired) $25.
    IMG_4105.jpgIMG_4103.jpg

    Non-locking gas cap 110129 $10.
    IMG_4111.jpgIMG_4109.jpg

    Locking gas cap 105137 $10.

    IMG_4126.jpgIMG_4117.jpg

    Fuel tank baffle with retainer 110155 $5.
    IMG_4098.jpgIMG_4097.jpg

    Upper steering shaft and U joint 100839+100840 $50.
    IMG_4093.jpgIMG_4092.jpg

    Trailing arm reinforcement plates 106708 $20. for both
    IMG_4091.jpgIMG_4090.jpg


    PM me with any questions or if you need a different picture. Payment would be through Paypal. I will list some more items soon. Thanks for looking.



    Jeff Porter
    ex-01678
    Attached Images

  2. #2
    Senior Member jmpdmc's Avatar
    Join Date:  May 2011

    Location:  Cranberry Twp., PA

    Posts:    116

    My VIN:    ex-01678

    For some reason, the fan shroud and fan motor pictures didn't load. I will try again:

    Fan shroud 100487 $45.

    IMG_4211.jpgIMG_4210.jpg

    Fans + motor 100415 $20 for both

    IMG_4215.jpgIMG_4212.jpg


    That looks better.


    Jeff
    Last edited by jmpdmc; 01-22-2021 at 01:42 PM. Reason: correction

  3. #3
    Senior Member jmpdmc's Avatar
    Join Date:  May 2011

    Location:  Cranberry Twp., PA

    Posts:    116

    My VIN:    ex-01678

    Second wave of parts:

    Front hub dustshield 105104 $5.

    IMG_4086.jpgIMG_4087.jpg

    Lug nuts 100181 (all acorn collars are tight) $20. for all

    IMG_4088.jpg

    Front stabilizer bar clamps + spacer clamps 108998 + 106960 (bushings included but not in good shape) $20. for all

    IMG_4081.jpgIMG_4080.jpg

    Paris-Rhone OEM starter 101044 (good for core or possible rebuild) $45.

    IMG_4073.jpgIMG_4074.jpgIMG_4077.jpgIMG_4078.jpg

    Bosch ignition coil and bracket 101052 $25.

    IMG_4052.jpgIMG_4051.jpgIMG_4054.jpg

    Distributor cap 102606 $10.

    IMG_4067.jpgIMG_4068.jpg

    Ignition distributor rotor 102604 $5.

    IMG_4069.jpgIMG_4070.jpg

    Ballast resistor 101054 $10.

    IMG_4062.jpgIMG_4063.jpg

    Ported vacuum switch 102405 $20.

    IMG_4047.jpgIMG_4046.jpg

    Idle speed thermistor 102480 $15.

    IMG_4042.jpgIMG_4043.jpg

    CV joint lock plates 100919 $25. for all

    IMG_4028.jpg

    Lambda sensor switch 102478 $10.

    IMG_4031.jpgIMG_4032.jpg

    Air inlet valve 105952 $20.

    IMG_4022.jpgIMG_4023.jpg

    Upper muffler bracket 108200 $25.

    IMG_4019.jpgIMG_4020.jpg

    LH (driver side) rear engine cover grille 105607 (note small bent area hit by broken belt) $15.

    IMG_4018.jpg

    LH+RH door sill seals (stainless and rubber) 108285+108286 $30. for both

    IMG_4013.jpgIMG_4014.jpg


    Early VIN major exhaust components:



    110576 Front Pipe with 105061 + 105060 L+R Heatshields
    100419 Catalytic Converter
    100420 Muffler 1981 style
    106931 Heatshield, Muffler
    102258 + 102257 L+R Exhaust Manifolds (resurfaced in 2006)
    108200 + 106108 Upper Muffler Bracket + Exhaust Manifold Stove
    105154R + 105153R L+R reconditioned Muffler Brackets
    Miscellaneous hardware



    Most exhaust parts have only a few hundred miles on them since installed at Grady's after accident repair in 2009. They were removed for a DPI exhaust. Current retail for everything is over $2400. per DMCH website. $650. for all.

    Thanks for looking.


    Jeff


    Attached Images

  4. #4
    Senior Member jmpdmc's Avatar
    Join Date:  May 2011

    Location:  Cranberry Twp., PA

    Posts:    116

    My VIN:    ex-01678

    SOLD:

    Front parking light sockets
    Grady taillight board
    Coolant reservoir brackets
    Both idler pulley brackets
    Brake master cylinder and reservoir
    Fuel filler neck
    Ballast resistor
    Ported vacuum switch
    Idle speed thermistor
    CV joint lock plates
    Lambda sensor switch




    Quote Originally Posted by jmpdmc View Post
    Second wave of parts:

    Front hub dustshield 105104 $5.

    IMG_4086.jpgIMG_4087.jpg

    Lug nuts 100181 (all acorn collars are tight) $20. for all

    IMG_4088.jpg

    Front stabilizer bar clamps + spacer clamps 108998 + 106960 (bushings included but not in good shape) $20. for all

    IMG_4081.jpgIMG_4080.jpg

    Paris-Rhone OEM starter 101044 (good for core or possible rebuild) $45.

    IMG_4073.jpgIMG_4074.jpgIMG_4077.jpgIMG_4078.jpg

    Bosch ignition coil and bracket 101052 $25.

    IMG_4052.jpgIMG_4051.jpgIMG_4054.jpg

    Distributor cap 102606 $10.

    IMG_4067.jpgIMG_4068.jpg

    Ignition distributor rotor 102604 $5.

    IMG_4069.jpgIMG_4070.jpg

    Ballast resistor 101054 $10.

    IMG_4062.jpgIMG_4063.jpg

    Ported vacuum switch 102405 $20.

    IMG_4047.jpgIMG_4046.jpg

    Idle speed thermistor 102480 $15.

    IMG_4042.jpgIMG_4043.jpg

    CV joint lock plates 100919 $25. for all

    IMG_4028.jpg

    Lambda sensor switch 102478 $10.

    IMG_4031.jpgIMG_4032.jpg

    Air inlet valve 105952 $20.

    IMG_4022.jpgIMG_4023.jpg

    Upper muffler bracket 108200 $25.

    IMG_4019.jpgIMG_4020.jpg

    LH (driver side) rear engine cover grille 105607 (note small bent area hit by broken belt) $15.

    IMG_4018.jpg

    LH+RH door sill seals (stainless and rubber) 108285+108286 $30. for both

    IMG_4013.jpgIMG_4014.jpg


    Early VIN major exhaust components:



    110576 Front Pipe with 105061 + 105060 L+R Heatshields
    100419 Catalytic Converter
    100420 Muffler 1981 style
    106931 Heatshield, Muffler
    102258 + 102257 L+R Exhaust Manifolds (resurfaced in 2006)
    108200 + 106108 Upper Muffler Bracket + Exhaust Manifold Stove
    105154R + 105153R L+R reconditioned Muffler Brackets
    Miscellaneous hardware



    Most exhaust parts have only a few hundred miles on them since installed at Grady's after accident repair in 2009. They were removed for a DPI exhaust. Current retail for everything is over $2400. per DMCH website. $650. for all.

    Thanks for looking.


    Jeff



  5. #5
    Senior Member jmpdmc's Avatar
    Join Date:  May 2011

    Location:  Cranberry Twp., PA

    Posts:    116

    My VIN:    ex-01678

    Sold:

    Engine cover slider
    Front hub dustshield
    Distributor cap


    Quote Originally Posted by jmpdmc View Post
    SOLD:

    Front parking light sockets
    Grady taillight board
    Coolant reservoir brackets
    Both idler pulley brackets
    Brake master cylinder and reservoir
    Fuel filler neck
    Ballast resistor
    Ported vacuum switch
    Idle speed thermistor
    CV joint lock plates
    Lambda sensor switch

  6. #6
    Junior Member
    Join Date:  Mar 2019

    Posts:    6

    I'm interested in you L+R Exhaust Manifolds. How much are you asking? Thanks!

  7. #7
    Senior Member Chris 16409's Avatar
    Join Date:  May 2011

    Location:  Fresno, CA.

    Posts:    1,382

    My VIN:    16409

    Do you have the key for the locking gas cap?
    Chris Miles

    For Better or Worse I own a DeLorean!
    1983 Grey Manual, VIN #16409, Fresno, California

  8. #8
    Senior Member jmpdmc's Avatar
    Join Date:  May 2011

    Location:  Cranberry Twp., PA

    Posts:    116

    My VIN:    ex-01678

    Since I have a generally complete exhaust, I am selling it whole. Sorry.



    Jeff


    Quote Originally Posted by glowof1000suns View Post
    I'm interested in you L+R Exhaust Manifolds. How much are you asking? Thanks!

  9. #9
    Senior Member jmpdmc's Avatar
    Join Date:  May 2011

    Location:  Cranberry Twp., PA

    Posts:    116

    My VIN:    ex-01678

    Chris,

    Sorry, no key but I believe they can be rekeyed/matched to your key.



    Jeff


    Quote Originally Posted by Chris 16409 View Post
    Do you have the key for the locking gas cap?

  10. #10
    Senior Member jmpdmc's Avatar
    Join Date:  May 2011

    Location:  Cranberry Twp., PA

    Posts:    116

    My VIN:    ex-01678

    SOLD:

    Ignition ECU

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •